Bidirectional magnetic contact. Frequency 868MHz. Radio range of 1600 meters in open space. 1 wired input. LED indicators for signal strength, battery status, alarm and tamper. -10 ° C ~ + 50 ° C operating temperature. Power supply: 1 CR123A 3V battery (estimated life of 2 years). 2mm ABS plastic shell. Transmitter dimensions: 104 x 27 x 25 mm. Magnet dimensions: 49 16 x 14 mm. EN50131 Grade 2 certificate.

Magnetic contact via one-way radio, frequency 868Mhz. EN50131 Grade 2 Certificate. The High Security Unidirectional Wireless Door / Window Contact is a supervised transmitter ideal for the perimeter protection of doors / windows in residential applications and small businesses. The transmitter has a built-in magnetic contact and an additional zone input that can be connected to magnetic contacts or other wired sensors, which can be used for various control or safety applications. The RWT72M has an additional blade switch to detect anti-sabotage activities that is not included with the T72C. Any attempt to sabotage the detector with powerful magnets will cause a tamper alarm. CR123 3V lithium battery included. Compatible with RISCO™ unidirectional and bidirectional wireless systems.

Magnetic contact door / window brown color. New protocol via radio "alpha". Power supply: 1 LI03V battery (supplied). Battery life: 5 years approx. Tamper: opening and wall. Dimensions: 100 x 22 x 23 mm.

Each RICOCHET enabled device provides signalling routes to and from Texecom Premier Control Panels. Should wireless connection between two devices weaken, the network will ‘self-heal’ and automatically re-route communications via alternate RICOCHET enabled devices. With more RICOCHET enabled devices installed, the greater the reliability of the system.

Door contact with auxiliary Input. Internal and External contacts work independently. Auxilliary input loop has tamper protection loop. Front & Rear Tampers. Enclosure protection: IP:30 / IK:04. Compatibility: Galaxy G2 (with RF portal), Domonial, VISTA (with 5882 euhs). Battery Life: >4 yrs. Operating Temperature -10° C to 55° C. Weight with Battery: 70g. Complete with Battery. EN/TS50131-2-6, Grade 2, Environmental Class II. measures (120 x 35 x 26 mm): 120 x 35 x 26mm.

Fully supervised, PowerCode magnetic contact transmitter. For UL installations, for use with the UL listed control unit, model PowerMax+ only. The transmitter includes a built-in reed switch (that opens upon removal of a magnet placed near it) and an auxiliary hard-wired input, programmable as either N.C. or E.O.L., for use with additional sensors - pushbuttons, detectors, door contacts etc. Each input has a unique 24-bit PowerCode ID, selected in the factory from over 16 million possible code combinations.

6 Wire 18mm Surface Contact with 1k/1k Resistor (Green), Grade 3 - Silver. Dimensions (L X W X D): 150 X 40 X 14. Cable Length (cm): 100. Material: Aluminium.

V-Plex Programmable Overhead Door Contact. Rugged aluminum housing and adjustable L bracket type magnet. Standard gap: 2" (51mm). 24" (61cm) armored cable. Epoxy sealed for protection from moisture and impact. Programmed from VISTA keypad. Switch Type: Form A (SPST) Reed. Contact Rating: 100ma @ 28VDC. Honeywell Exclusive: Patent polling loop technology

Flush mount magnetic contact for residential applications.

Brass magnetic contact with high mechanical resistance for flush mounting on doors and windows. Reed contact with NC output with near magnet or changeover reed contact. Wire (2 for contact - 3 for changeover contact + 2 for anti-tampering). -25°C to +70°C. IP 65. Anti-tampering wires. 10 pcs./package.

Plastic flush contact, plastic, 6 wires, resistors 1k/1k, gap 13mm, cable 1m. This MG contact is available with following EOL resistors too: 4k7/2k2, 8k2/8k2, 4k7/4k7, 6k8/4k7, 5k6/5k6 and 2k2/2k2.

Flush Quick Fit Door Contact. Screw terminal block, no junction box required. Microswitch tamper. Selectable end of line resistor. Can use own resistors. Available in White or Brown. Can be fitted in double pole. Can be used on double door configuration. Magnetic Immunity.

Flush Quick Fit Door Contact. Screw terminal block, no junction box required. Microswitch tamper. Selectable end of line resistor. Can use own resistors. Available in White or Brown. Can be fitted in double pole. Can be used on double door configuration.

3/8" Diameter Miniature Press Fit Magnetic Contact. With a 3/4" long magnet, the 951WG is ideal for casement windows, sliding windows, and other thin frame applications. Standard gap: 1-1/4"– the largest gap of any mini 3/8" contact. 12" leads are standard. Switch Type: Form A (SPST) Reed. Contact Rating: 300ma @ 30VDC.

Recessed-Mounted Contact. Gap (+/- 10%): 1-1/4" (32 mm). Switch Dimensions: 3/8" diameter, 3/4" L (9.5 mm diameter, 19 mm L). Magnet Dimensions: 3/8" diameter, 3/4" L (9.5 mm diameter, 19 mm L).

Magnetic contact, with tamper loop, flush mount, 12 mm. gap, 0.3 m. cable, white.

The Honeywell 947-75 is a 3/4” diameter steel door recessed contact designed to protect steel doors from intrusion. You will need to wire your 947-75 recessed contact back to an open wired zone on your alarm control panel. You will need to splice the wire leads coming out of the backside of the 947-75 recessed contact to the contact loop wire coming from your alarm control panel. Most people prefer recessed contacts to surface mount contacts as they provide a cleaner look. While surface mount contacts distract from the decor of your property, recessed contacts are hidden within your door and window frames and are therefore much less obtrusive. Unfortunately, as recessed contacts need to be drilled into a door or window, they are typically smaller devices. When you install a small magnet inside a steel door, the magnetic field normally gets obstructed and the contact does not work. However, the 947-75 uses a much larger magnet which is able to penetrate the steel door and energize the recessed contact. The steel door recessed contact is ideal for commercial and industrial applications. The Honeywell steel door recessed contact has an internal reed switch with a rating of 100mA at 28VDC. The reed switch is a Form A, SPST, normally closed contact that can be wired to any normally closed zone. When the corresponding magnet is in close proximity to the contact, the contact loop is closed and the alarm control panel is happy. If the steel door opens while the system is armed, the magnet separates from the contact and the loop opens causing an alarm. The magnet spacing gap of the 947-75 recessed contact is 1/2” when installed within a steel door.

Pack of 40 Sockets for UTC™ Aritech™ DC418 mag contact.

Robust magnetic contact, high security. NC. IP43. Aluminum housing. Gap: 40 mm. Tamper. Dimensions: 74 x 25 x 15 mm. EN50131-2-6 Grade 2, Class III.

Magnetic surface contact, NC. IP43. Aluminum housing. Gap: 40 mm. Tamper. Dimensions: 74 x 14 x 10 mm. EN50131-2-6 Grade 2, Class III.

Surface magnetic contact, NC, with 6 meters cable. IP67. Aluminum housing. Gap: 40 mm. Tamper. Dimensions: 74 x 25 x 15 mm. EN50131-2-6 Grade 2, Class III.

Surface magnetic contact, NC, with 2 meters cable. IP67. ABS housing, white color. Gap: 25 mm. Tamper. Dimensions: 58 x 14 x 5 mm. EN50131-2-6 Grade 2, Class III.

Aluminum magnetic contact for surface mounting. Thanks to its solid die-cast aluminum structure, it is suitable for applications in factories, shopping malls, etc. Its long operating distance allows the use on frames of any material and with large play. Available with wire and terminal connection (462 model). The wire connected version has a reed section that contains a tight reed with polyurethane resin and an anti-tampering loop to reduce violation risks. The terminal connected version is provided with tear-off protection and a printed circuit board that can house balancing resistors. Arranged to be protected with a 10 mm diameter black PVC coated steel cable sheath (not included).

Aluminum magnetic contact for surface mounting. Thanks to its solid die-cast aluminum structure, it is suitable for applications in factories, shopping malls, etc. Its long operating distance allows the use on frames of any material and with large play. Available with wire and terminal connection (462 model). The wire connected version has a reed section that contains a tight reed with polyurethane resin and an anti-tampering loop to reduce violation risks. The terminal connected version is provided with tear-off protection and a printed circuit board that can house balancing resistors. Arranged to be protected with a 10 mm diameter black PVC coated steel cable sheath (not included).