English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Detectors

    Products 623
    UTC™ GST® Conventional Rate of Rise and Fixed Temperature Heat Detector [DC-9103E]
    UTC™ GST® Conventional Rate of Rise and Fixed Temperature Heat Detector
    Ref.: DC-9103E
    DC-9103E conventional rate of rise and fixed temperature heat detector is a new generation product of GST. With built-in microprocessor, it works stably by being fixed with highly reliable fire judging program. On detecting a fire signal, it can change its own current to transmit the signal to fire alarm control panel (FACP) or addressable zone monitor unit. The detector keeps illuminating fire LED until it is reset by power-down.
    V.A.T. included
    Consult
    UTC™ GST® Conventional Optical Smoke Detector [R6601]
    UTC™ GST® Conventional Optical Smoke Detector
    Ref.: R6601
    With the technique of scattering, the detector's reliability, stability and consistency are improved. The special chamber design ensures the insert-defend, dirt-defend and anti-light disturbance. The detector is non-addressable and can start operation by applying DC power. It has a pair of output contact, which is broken in normal and closes and remains closed after alarming, and the indicator on the detector is lit. It can be reset after power cut. The detector adopts orientation base, with only one mounting mode.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent Reflective Beam Detector [ I-9105R]
    UTC™ GST® Intelligent Reflective Beam Detector
    Ref.: I-9105R
    I-9105R Intelligent Reflective Beam Detector works on the principle of reflective infrared beam smoke detector that can be directly connected to a fire alarm loop. Transmitting status information via the loop between the detector and controller. The detector must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. Built-in intelligent microprocessor, the detector has strong ability of analysis and judgment. The detector automatically carries out system adjustment, compensation and variation of ambient data. Secure and speedy communication through the on board processor enables the detector to make its own decision, resulting in greater automation. The sensor and the panels utilized fuzzy logic providing an almost limitless cause and effect scenarios
    V.A.T. included
    Consult
    UTC™ GST® Detector Base [DZ-03D]
    UTC™ GST® Detector Base
    Ref.: DZ-03D
    DZ-03 Base is used to mount conventional and intelligent smoke, heat and combination detectors as their conductive base. It’s made of flame-resistant plastic ABS, which is a UL94 listed material. It features attractive appearance, novel structure and stable performance. Its flame class is V-0. During installation, you can easily fix the base before connecting cables, and then tw ist the detector onto the base.
    V.A.T. included
    Consult
    UTC™ GST® Conventional Combination Heat/Photoelectric Smoke Detector [DC-9101E]
    UTC™ GST® Conventional Combination Heat/Photoelectric Smoke Detector
    Ref.: DC-9101E
    DC-9101E conventional combination heat photoelectric smoke detector, non-addressable, is a kind of combination detector consisting of smoke sensing parts and semi-conductor heat sensing parts in technological structure and circuit structure. Together with DP-9907, it can connect to conventional fire alarm control panel or connect with intelligent fire alarm control panel through I-9319 Addressable Zone Monitor Unit conduct the processing of detector signals. The detector has the advantages of both conventional photoelectric detector and rate of rise and fixed temperature heat detector. Just because of the combination of smoke detector and heat detector, it overcomes the non-sensitivity to dark smoke particles of ordinary scattering photoelectric detectors. It can also pick up fire with obvious rise of temperature such as alcohol flame, thus extending the application range.
    V.A.T. included
    Consult
    UTC™ GST® Standard Base [DB-01D]
    UTC™ GST® Standard Base
    Ref.: DB-01D
    DB-01 Base is used to mount digital and innovation conventional smoke, heat and combination detectors as their conductive base. It’s made of flame-resistant plastic ABS. It features attractive appearance, novel structure and stable performance. Its flame class is V-0. During installation, you can easily fix the base before connecting cables, and then twist the detector onto the base.
    V.A.T. included
    Consult
    UTC™ GST® Conventional Photoelectric Smoke Detector [DC-9102E]
    UTC™ GST® Conventional Photoelectric Smoke Detector
    Ref.: DC-9102E
    DC-9102E conventional photoelectric smoke detector is a new-generation product. With built-in microprocessor, the detector is highly fixed with reliable fire judging program, which make it stable and reliable performance. When the detector checks fire signal, it will send fire information to the control panel or addressable zone monitor unit by means of current changing. The detector keeps turning on the LED to indicate alarm state until it is reset. The detector is developed from sensing chamber by scattering theory. It has the ability to resist dust contamination and environmental light.
    V.A.T. included
    Consult
    Base Mounted Isolator for UTC™ GST® Digitial Innovation Range Detectors [DC-9504E]
    Base Mounted Isolator for UTC™ GST® Digitial Innovation Range Detectors
    Ref.: DC-9504E
    In loop type fire alarm system, such condition often occurs that partial short circuit of loop affects the whole system. DC-9504E Base Mount Isolator can isolate the shorted circuit from the whole system and light the yellow LED to ensure normal operation of other parts and locate the part in fault. After the fault is cleared, the part of the loop will be re-included into the system. The isolator is applicable to both Class A and Class B fire alarm systems.
    V.A.T. included
    Consult
    UTC™ GST® Innovation Fixed & Rate-of-Rise Heat Detector /w Remote Indicator Output [DI-9103E]
    UTC™ GST® Innovation Fixed & Rate-of-Rise Heat Detector /w Remote Indicator Output
    Ref.: DI-9103E
    DI-9103E intelligent rate of rise and fixed temperature heat detector is a new addressable fire alarm device cooperating with GST intelligent fire alarm control panels(FACP) to build a fire detection system. The detector shows fire alarm by the LED indicator and transmits the signal to the FACP.
    V.A.T. included
    Consult
    UTC™ GST® Innovation Multi Sensor /w Remote Indicator Output [DI-9101E]
    UTC™ GST® Innovation Multi Sensor /w Remote Indicator Output
    Ref.: DI-9101E
    DI-9101E intelligent combination heat photoelectric smoke detector integrates photoelectric detection and fixed temperature and rate of rise detection technology by combining smoke sensor and semi-conductor heat sensor in mechanism and circuitry structure. Just because of the combination of smoke detection and heat detection, it not only overcomes the disadvantage that detectors using common infrared scattering technology are insensitive to black smoke with small particles, but also can pick up fire with obvious rise of temperature such as alcohol flame, thus extending its application range.
    V.A.T. included
    Consult
    UTC™ GST® Innovation Standard Detector Base for Addressable and Conventional (when using EOLR) [DB-01]
    UTC™ GST® Innovation Standard Detector Base for Addressable and Conventional (when using EOLR)
    Ref.: DB-01
    DB-01 Base is used to mount digital and innovation conventional smoke, heat and combination detectors as their conductive base. It’s made of flame-resistant plastic ABS. It features attractive appearance, novel structure and stable performance. Its flame class is V-0. During installation, you can easily fix the base before connecting cables, and then twist the detector onto the base.
    V.A.T. included
    Consult
    UTC™ GST® Detector Base [DZ-03]
    UTC™ GST® Detector Base
    Ref.: DZ-03
    DZ-03 Base is used to mount conventional and intelligent smoke, heat and combination detectors as their conductive base (C-9102, C-9103, I-9102, I-9103). It’s made of flame-resistant plastic ABS, which is a UL94 listed material. It features attractive appearance, novel structure and stable performance. Its flame class is V-0. During installation, you can easily fix the base before connecting cables, and then twist the detector onto the base.
    V.A.T. included
    Consult
    UTC™ GST® Innovation Optical Detector /w Remote Indicator Output [DI-9102E]
    UTC™ GST® Innovation Optical Detector /w Remote Indicator Output
    Ref.: DI-9102E
    DI-9102E Intelligent Photoelectric Smoke Detector is a new generation product, connected with intelligent fire alarm control panel to form fire alarm system. The detector turns on fire LED to indicate fire alarm condition and transmits the fire signal to the control panel. The detector is developed from sensing chamber by scattering theory. Besides stable performance and easy maintenance, the detector has the ability to endure dust contamination and environmental light. The detector utilizes drift compensation algorithm: When the environment is changing, such as dust accumulation, humidity and temperature changing, the detector can figure out these drift variation to make up for sensitivity, thus the amount of smoke needed to generate an alarm remains constant, irrespective of environmental conditions.
    V.A.T. included
    Consult
    Base Mounted Isolator for UTC™ GST® 'I' Range Detectors [C-9504E]
    Base Mounted Isolator for UTC™ GST® 'I' Range Detectors
    Ref.: C-9504E
    In loop type fire alarm system, it often occurs that partial short circuit of loop affects the whole system. C-9504E Base Mount Short Circuit Isolator can isolate the shorted circuit from the whole system to ensure normal operation of the remaining parts and locate the failed part by illuminating a yellow indicator. When the short circuit fault is cleared, the shorted part will be restored. The isolator is applicable to all loop type fire alarm systems, either Class A or Class B loop.
    V.A.T. included
    Consult
    3 Relay Card for SMART3 GC and NC [STS3REL]
    3 Relay Card for SMART3 GC and NC
    Ref.: STS3REL
    Plug-in card of 3 relays for SMART 3 GC and SMART3NC detectors. Relay at 12 or 24VDC.
    V.A.T. included
    Consult
    Communication Card for SMART3 [STS/IDI]
    Communication Card for SMART3
    Ref.: STS/IDI
    Identification plug-in card for "SMART 3" sensors programmation.
    V.A.T. included
    Consult
    SENSITRON™ Calibration Keypad [STS/CKD+]
    SENSITRON™ Calibration Keypad
    Ref.: STS/CKD+
    Calibration keypad that is connected to a detector for zero, luz adjustment and 4-20mA output. For GC2 and GC3 sensors.
    V.A.T. included
    Consult
    SENSITRON™ Calibration Kit for Gas Detector [KIT-GAS]
    SENSITRON™ Calibration Kit for Gas Detector
    Ref.: KIT-GAS
    Calibration kit for gas detectors with tight or flameproof head in a metal suitcase and calibration procedure. Consist of: 1 Adapter by detector heads ZMCAP/123, 1 calibration keypad STS/CKD, 1 control sleeve SPPPTUB, 1 gas control valve REG-0.30. Gas bottle pattern is not included. Consult EMACS to have it.
    V.A.T. included
    Consult
    Interface SENSITRON™ Interface for 4 Circuits of 4-20mA Input [IIG4N]
    Interface SENSITRON™ Interface for 4 Circuits of 4-20mA Input
    Ref.: IIG4N
    Addressable interface with 4 input circuits for monitoring of analogical signal of 4-20mA deriving of flammable or toxic gas detectors. Includes a dedicated directionning (1-99) and is connected directly to an analogical communication loop, occupies 12 consecutive directions of detectors. Includes a plastic box for surface mounting.
    V.A.T. included
    Consult
    SENSITRON™ Gas Detector for GPL SMART3 NC Series [S1455GP]
    SENSITRON™ Gas Detector for GPL SMART3 NC Series
    Ref.: S1455GP
    Detector designed to offer an economic product with professional services for unclassified areas. Use a catalytic cell for flammable gas. Dispose of a standard output at 4-20mA and can dispose, in option of additional features for communications through RS485 or 3 output relays.
    V.A.T. included
    Consult
    SENSITRON™ Gas Detector for Methane SMART3 NC Series [S1455ME]
    SENSITRON™ Gas Detector for Methane SMART3 NC Series
    Ref.: S1455ME
    Detector designed to offer an economic product with professional services for unclassified areas. Use a catalytic cell for flammable gas. Dispose of a standard output at 4-20mA and can dispose, in option of additional features for communications through RS485 or 3 output relays.
    V.A.T. included
    Consult
    HONEYWELL™ SMART3 VGS.AD Gas Detector for Propane [VGS.AD-PR]
    HONEYWELL™ SMART3 VGS.AD Gas Detector for Propane
    Ref.: VGS.AD-PR
    Waterproof gas detector without display VGS.AD. Aluminum. IP65 Dimensions A: 106 mm H: 170 mm F: 65 mm. For flammable gases, propane probe 4-20mA, 0-100% LEL. Type 2 probe.
    V.A.T. included
    Consult
    HONEYWELL™ SMART3 VGS.AD Gas Detector for Methane [VGS.AD-ME]
    HONEYWELL™ SMART3 VGS.AD Gas Detector for Methane
    Ref.: VGS.AD-ME
    Waterproof gas detector without display VGS.AD. Aluminum. IP65 Dimensions A: 106 mm H: 170 mm F: 65 mm. For flammable gases, 4-20mA methane catalytic probe, 0-100% LEL. Type 2 probe.
    V.A.T. included
    Consult
    HONEYWELL™ SMART3 VGS.AD Gas Detector for GPL [VGS.AD-GP]
    HONEYWELL™ SMART3 VGS.AD Gas Detector for GPL
    Ref.: VGS.AD-GP
    Waterproof gas detector without display VGS.AD. Aluminum. IP65 Dimensions A: 106 mm H: 170 mm F: 65 mm. For flammable gases, 4-20mA LPG catalytic probe, 0-100% LEL. Type 2 probe.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved