CVBS composite video transmitter (2 channels) through single-mode fiber optic that allows a transmission distance of up to 20 km. Kit composed of 2 modules (transmitter and receiver) that are interconnected with each other through fiber optic cable based on connectors FC simplex. Specs. Optical fiber distance up to 20 km. Wavelength: 1310/1550 nm. Fiber optic cable and connectors type: FC simplex singlemode. Each module has a female FC fiber connector, 2 female BNC video connectors and a 35mm jack for power. Video cameras or video sources connect to the video transmitter module. Terminal block with RS485 connectivity to control cameras that are compatible. The video receiver connects to the receiver module. This module supplies the 2 video signals from the transmitter module. Compatible with PAL, SECAM and NTSC video systems. Each module requires a 5 VDC, 2 A power supply (included). Mounted in black metal housings with tabs for wall or chassis mounting. Size of each module: 113 x 118 x 26 mm.

Multiple transmission system for 1 coaxial cable only: 2 Video + 12V Power. Includes Tx and Rx. Transmits Video AHD, TVI, CVI and CVBS signal. Max consumption 1A. Includes PSU. Dimensions 120-100 (W) x 25 (H) x 75 (F) mm.

This Power over Coaxial Cable Extender Transmitter/Receiver is a 1-port 10/100BaseT(X) PoE/PoE+ PD and 1-port BNC PoE over Coaxial Extender Transmitter/Receiver. It is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 230 m / 754.6 ft (RG11) or 180 m / 590.5 ft (RG6) into PoE IP camera. The Extender consists of a Transmitter and Receiver pair, which can work in pair without any power adapter anywhere on your network infrastructure. It is perfect solution for sending IP video links and power to remote PoE IP camera installation that is beyond the 100-meter (328-feet) distance limit of Ethernet.

Cost-effective analogue to IP over coax solution. 10/100Mbps Ethernet. Auto-negotiation and auto-MDI/MDI-X. Half-duplex back pressure and IEEE802.3x full-duplex pause-frame ?ow control. Plug-and-play installation. 75 ohm coax cable. Extensive LED indicators for network diagnostics and PoE power usage. Slim IP30 metal enclosure. Powered by local power supply (for up to 120W of PoE power) or powered via the coax (for up to 24W of PoE power). Alarm relay output for port breakdown and power-failure alert. Wide operating temperature range of -20º C ~ +70º C. Power over Ethernet. Protects non-PoE devices if accidentally connected. Complies with IEEE 802.3at.

Designed for surveillance IP cameras for long distance transmission. Transmits IP duplex signals up to 800 meters away and sends power to the cameras through a coaxial cable as opposed to Ethernet UTP Cat6 cable which transfers signals for only 100 meters. Powers camera only after local unit and remote unit are connected correctly. Auto shutdown for short circuit, open circuit, overloads, and signal loss. Auto test and reconnection until the problem is solved. Built-in TVS and GDT against lightning-induced current and transient voltage. Applies to all low and high resolution IP cameras, including PTZ cameras and Infrared cameras with high power consumption.

1-port media converter powered by coaxial with PoE-AT. To be used in conjunction with the coaxial to network media converter and network switches (POC Series). Working temperature: -10ºC to 60ºC. No power required.

1 port media converter powered by coaxial with POE-AT (30W). To be used in conjunction with the POC252-1CX-1P media converter. Working temperature: -10ºC to 60ºC. It does not require feeding.

Manageable switch with 16 ports fed through coaxial with PoE+ 802.3at (380W) + 2-ports Gigabit RJ45 / SFP combinable. To be used together with the POC252-1CX-1P media converter. Working temperature: 0 to 50ºC. Power at 220VAC. SFP modules not included.

Planet™ Technology USA’s extended temperature 1000Mbps Gigabit SFP Fiber Transceivers (-40 to 75°C) are the ideal Industrial Ethernet fiber solution that can reliably operate in electrically harsh and wide temperature range (-40 to 75°C) environments. These Small Form Factor Pluggable (SFP) transceiver modules operate with an integrated duplex data link over single mode optical fiber. Planet Technology USA’s Small Form Factor Pluggable (SFP) transceivers work with PLANET’s Gigabit SFP interface to provide a reliable, high-performing Gigabit Ethernet network. The device’s hot pluggable feature enables network administers to easily install SFP MSA compliant ports without interrupting the host equipment in operation.

PLANET™ Technology USA’s Extended Temperature 1000Mbps Gigabit SFP Fiber Transceivers (-40 to 75°C) are the ideal Industrial Ethernet fiber solution that can reliably operate in electrically harsh and wide temperature range (-40° to 75°C) environments. These Small Form Factor Pluggable (SFP) transceiver modules operate with an integrated duplex data link over single mode optical fiber. Planet Technology USA’s Small Form Factor Pluggable (SFP) transceivers work with PLANET’s Gigabit SFP interface to provide a reliable, high-performing Gigabit Ethernet network. The device’s hot pluggable feature enables network administers to easily install SFP MSA compliant ports without interrupting the host equipment in operation.

Multi-mode WDM Tx-1550, 2KM, 100Mbps SFP fiber transceiver (-40 ~ 75ºC), 6D0D.0M6 supported.

Multi-mode WDM Tx-1310, 2KM, 100Mbps SFP fiber transceiver (-40 ~ 75ºC), D57D.7M5 supported.

WDM Tx-1550, 60KM, 100Mbps SFP fiber transceiver (-40 ~ 75ºC), DDM.

WDM Tx-1310, 60KM, 100Mbps SFP fiber transceiver (-40 ~ 75ºC), DDM.

Mini GBIC Single Mode LX Module - 80KM, DDM Supported (-40 to 75 C).

Mini GBIC Single Mode LX Module - 40KM, DDM Supported (-40 to 75 C).

PHY Type: IEEE 802.3ab 1000BASE-T, Fiber Type: N/A, Connector: RJ45 Copper, DDM: N/A, Wavelength: N/A, Maximum Distance: 100 m, Operating Temperature: -40~75 degrees C.

The MGB-2GSR by Planet Technology is a 2.5G SFP Fiber Transceiver (0 to 70°C). Package: SFP, PHY Type: 2500Base-X, Fiber Type: Multi-Mode, Connector: Dual LC/UPC, Wavelength: 850nm, Max. Distance: 300m, DDM Supported: Yes, Operating Temperature: 0 to 70°C, TAA Compliant.

The MGB-2GLR20 by Planet Technology is a 2.5G SFP Fiber Transceiver (0 to 70°C). Package: SFP, PHY Type: 2500Base-X, Fiber Type: Single Mode, Connector: Duplex LC/UPC, Wavelength: 1310nm, Max. Distance: 20km, DDM Supported: Yes, Operating Temperature: 0 to 70°C, TAA Compliant.

The MGB-2GLR2 by Planet Technology is a 2.5G SFP Fiber Transceiver (0 to 70°C). Package: SFP, PHY Type: 2500Base-X, Fiber Type: Single Mode, Connector: Duplex LC/UPC, Wavelength: 1310nm, Max. Distance: 2km, DDM Supported: Yes, Operating Temperature: 0 to 70°C, TAA Compliant.

The MGB-2GLB20 by Planet Technology is a 2.5G SFP Fiber Transceiver (0 to 70°C). Package: SFP, PHY Type: 2500Base-X, Fiber Type: Single Mode, Connector: Simplex LC/UPC, Wavelength: TX: 1550nm, RX: 1310nm, Max. Distance: 20km, DDM Supported: Yes, Operating Temperature: 0 to 70°C, TAA Compliant.

The MGB-2GLA20 by Planet Technology is a 2.5G SFP Fiber Transceiver (0 to 70°C). Package: SFP, PHY Type: 2500Base-X, Fiber Type: Single Mode, Connector: Simplex LC/UPC, Wavelength: TX: 1310nm, RX: 1550nm, Max. Distance: 20km, DDM Supported: Yes, Operating Temperature: 0 to 70°C, TAA Compliant.

PHY Type: 2500BASE-X, Fiber Type: Single-mode, Connector: Simplex LC/UPC, DDM: Yes, Wavelength: TX1550nm, RX1310nm, Maximum Distance: 20Km, Operating Temperature: -40~75 degrees C.

PHY Type: 2500BASE-X, Fiber Type: Single-mode, Connector: Simplex LC/UPC, DDM: Yes, Wavelength: TX1310nm, RX1550nm, Maximum Distance: 20Km, Operating Temperature: -40~75 degrees C.