Risco video expander module with radio receiver with 32 zones and 16 868 MHz buttons compatible with ProSYS™ Plus from version 1.4. Grade 3. Allows up to 8 camera detectors to a single video expander module. Up to 32 wireless zones and 16 “Rolling code” commands. It can be installed outside or inside the panel box. In ProSYS™ Plus, up to 16 video expander modules can be installed and a maximum of 8 on each bus line. Power supply: 12 - 14.4 Vdc. Maximum consumption: 65mA. Dimensions: 125 x 78 x 25mm.

Reception software for TCP / IP and GSM / GPRS modules.

RisControl is a responsive, high resolution 8” touchscreen keypad, offering intuitive easy to use interface. With RisControl the user can control all alarm and cloud-based solutions from RISCO Group from one access point. With a clear overview of the system status, easy arm/disarm functionality and the option to view live video and recordings from the VUpoint Video Solution. RisControl communicates via the System Bus (RS-485) with the control panel. The communication with RISCO Cloud is via WiFi.

15 meter curtain lens for iWISE DT Grade 2 and IWISE™ via radio (No Quad or PET).

Transparent 15 meter curtain lens for IWISE™ DT Grade 3 detectors.

Corridor lens 10 meters and 15 meters for detectors IWISE™ DT Grade 2.

Corridor lens 10 meters and 15 meters for detectors IWISE™ DT Grade 3.

25-meter long-range lens for IWISE™ DT Grade 2 detectors.

Lens for High Installation of WatchOUT™ PIR wired and PIR via radio.

Long-range lens up to 23 meters for WatchOUT™ PIR wiring and PIR via radio.

Hall lens for CoMET™, reach 18 x 2.3 meters.

Protection for RK66S seismic detector, for safe locks.

Shock and vibration detector plus magnetic contact for window, door, wall or ceiling. Digital shock detector, with a magnetic door / window contact for internal use. The attack is detected as soon as the intruder tries to force, break, pierce or even see through the protected window, door, wall or ceiling. Power 9V - 16 VDC 8.5 mA (17 mA Max). Dimensions: 25 x 85 x 95 mm detector, 10 x 12 x 58 magnetic contact.

Shock and vibration detector plus magnetic contact for window, door, wall or ceiling. Digital shock detector, with a magnetic door / window contact for internal use. The attack is detected as soon as the intruder tries to force, break, pierce or even see through the protected window, door, wall or ceiling. Power 9V - 16 VDC 8.5 mA (17 mA Max). Dimensions: 25 x 85 x 95 mm detector, 10 x 12 x 58 magnetic contact.

The ShockTec detectors have a reliable built-in calibration method that prevents over or under sensitive settings. Intelligent Digital Signal Processing discriminates between real attacks and natural background vibrations by analysing the vibration signal.

Smoke and heat unidirectional / bidirectional 868 MHz wireless detector. Combined smoke detector (photoelectric sensor) and heat detector with 4 fixed temperature sensors and temperature increase. 85 dB to 3 m sounder built-in. It has several modes of operation, smoke + heat, smoke only and only heat. The "Only Heat" mode can be installed in difficult environments, such as kitchens or bathrooms. Early detection is achieved from the rapid rise in temperature before the smoke is detected. The four heat sensors measure the fixed temperature and the rapid increase of it with precise measurements and high immunity against false alarms. It incorporates a test button to activate auto-test and alarm. Easy change of the batteries by the same owner. Indicator of low battery by led and ptido every 30 s. Operating temperature: 0 to 55 ºC. Power supply 4 lithium batteries of 3V type CR123. Consumption: 0.02 mA. Autonomy normal conditions 3 years. Dimensions: Ø 133.8 x 50.2 mm. Certification EN14604.

Additional kit of ball joints for outdoor curtain detectors.

ViTRON™ Plus uses a unique pattern recognition analysis of framed pane glass breakage, providing superior detection combined with excellent false alarm immunity. These adjustment-free and easy-to-install units detect breaking of all standard framed glass types and thickness while ignoring non-framed glass breakage and other possible sources of false alarms. Choice of wall/ceiling or flush-mount.

Compatible with Agility™ 3, LightSYS™ 2, ProSYS™ PLUS. Water-resistant bracelet, which has been designed to be worn as a wristwatch or as a pendant. The panic button can be used for personal emergency situations, to signal a panic alarm in case of difficulty when the victim is unable to reach another communication device. Ideal for the elderly or disabled - it provides peace of mind for users and their families.

868MHz unidirectional wireless repeater for zones. Compatible with Agility™ 3, LightSYS™ 2 and ProSYS™ PLUS. The unidirectional radio repeater is used to extend the radio range between the RISCO™ systems and their unidirectional radio devices. The repeater can extend the distance in a normal environment or in environments with a high level of noise that could affect their communication with the panel. Up to 7 repeaters can be linked, so the extension range can be extended.

Universal 1-zone transmitter with pulse analyzer via unidirectional radio, frequency 868Mhz. EN50131 Grade 2 certificate. CR123 3V lithium battery included. Compatible with RISCO™ unidirectional and bidirectional wireless systems.

Transmitter of double function and effective depending on its cost. It combines two separate channels within a single physical device and is ideal for the perimeter wireless protection of doors / windows in residential applications and in small shops. With two separate channels, it can be used in two different applications: As a perimeter protection for doors and windows when connected to a single channel and as a protection for louver detectors using the second channel. Each channel can be connected to wired magnetic contacts or other wired sensors that can be used for various control or safety applications. 3V CR123 Lithium battery included.

Programming cable with USB adapter for Agility™ 3 and LightSYS™ 2 main panels.

USB cable for programming ProSYS™ Plus control units.