Halogen free cable of 3 wires of 0.75 mm² (low capacity), shielded with an aluminium tape more a drain wire. Recommended for connections to RS-485 range of AGUILERA™ network. Complies with EN 50265-2-1, EN 50266, EN 50267-2 and EN50268 standards. Price per meter (Provided in 100 meters reels).

Complies with EN 50265, EN 50266, EN 50267, EN 50268, EN50200 standards. Halogen-free, flame retardant cable. Composed two wires (1.5 mm²) shielded with a aluminium tape and a polyester case, homologated for analogue system. Price per meter (Provided in 100 meters reels).

Complies with EN 50265, EN 50266, EN 50267, EN 50268 standards. Halogen-free, flame retardant cable. Composed two wires (1.5 mm²) shielded with a aluminium tape and a polyester case, homologated for analogue system. Price per meter (Provided in 100 meters reels).

Provided of 1 loop of 125 devices, where you can connect detectors, buttons, manoeuvre module, control and more elements that configure the installation. Switching power supply of 27,2VDC 2A. Emergency battery charger. Capacity for two batteries of 12V/7Ah. Dimensions: High 274 - Width 322 - Depth 123mm.

13.8Vdc power supply for charging the emergency battery.

Power supply for charging lithium emergency batteries.

Provided of 1 AE/SA-CTL card with 2 loops for 125 devices each, where you can connect detectors, buttons, manoeuvre module, control and more elements that configure the installation. Control Capacity up to 250 equipments. Switching power supply of 27.2VDC 4A. Emergency battery charger. Capacity for two 12V/7Ah batteries. Dimensions: High: 410- Width 310- Depth120mm.

Mircroprocessed control unit of two algorithmic loops. The capacity of each loop is about 125 devices, whcich you can connect detectors, push buttons, manoeuvre module, control module and more elements that configure the installation. Capacity to control a total of 250 devices. Dispose of light indicators for the control of correct operation and communication between devices and the panel.

Microprocessed panels of attractive design, made in ABS, according to EN 54 part 2 and 4. 2 Conventional detection loop with active end of line. Access level control through keys. 2 EVACuation monitored outputs. Fire relay (General alarm) and general breakdown relay. 24VDC auxiliary output. keypad with 6 keys for management. "Zones test" mode. Individual connection/disconnection of detection zones and eVACuation zones. 10 Independent LEDs for alarm indications. Requires a unique 12V/7Ah battery. Continued monitoring of all the system. Dimensions: 340 x 290 x 100.

Microprocessed metal panels, according to EN54 part 2 and 4. 2 conventional detection loops with active end of line. Access level control through keys. 2 EVACuation monitored output. Fire relay (General alarm) and general breakdown relay. 24VDC auxiliary output. keypad with 6 keys for management. "Zones test" mode. Individual connection/disconnection of detection zones and eVACuation zones. 10 Independent LEDs for alarm indications. Requires a unique 12V/7Ah battery. Continued monitoring of all the system. Dimensions AE/C5-2M: 200 x 290 x 80

Two analog loop control unit with independent microprocessor. The capacity of each loop is 125 pieces of equipment, to which the detectors, buttons, maneuver modules, control modules and other elements that make up the installation are connected. Total control capacity of 250 teams. It has light indicators to control the correct operation and communications with the equipment and the control unit.

24Vdc power supply for the CE100 system. 230 Vac input.

Microprocessed panels of attractive design, made in ABS, according to EN 54 part 2 and 4. 4 Conventional detection loop with active end of line. Access level control through keys. 2 EVACuation monitored outputs. Fire relay (General alarm) and general breakdown relay. 24VDC auxiliary output. keypad with 6 keys for management. "Zones test" mode. Individual connection/disconnection of detection zones and eVACuation zones. 10 Independent LEDs for alarm indications. Requires a unique 12V/7Ah battery. Continued monitoring of all the system. Dimensions: 340 x 290 x 100.

Microprocessed metal panels, according to EN54 part 2 and 4. 4 conventional detection loops with active end of line. Access level control through keys. 2 EVACuation monitored output. Fire relay (General alarm) and general breakdown relay. 24VDC auxiliary output. keypad with 6 keys for management. "Zones test" mode. Individual connection/disconnection of detection zones and eVACuation zones. 10 Independent LEDs for alarm indications. Requires a unique 12V/7Ah battery. Continued monitoring of all the system. Dimensions AE/C5-2M: 320 x 220 x 80.

Retainer 50 Kg/490N for floor with extendable arm from 15 to 18 cm, with traction plate, release button, 2 protection diodes. EN 1155 certified. Protection: IP40. Consumption: 45mA 24Vcc.

Smart central for fire control with bus connections for 1 to 4 cards (AE/SA-CTL) . Each card control two bidirectional algorithm loop, with capacity of 125 devices for each loop, where you can connect detectors, buttons, manoeuvre module and more elements that configure the installation. Capacity to control up to 1000 devices that can control up to 3000 independents points. For each 250 devices the central provide an independen microprocesor. Independent switching power supply of 27,2VDC 4A. Emergency battery charger. Capacity for two 12V/17Ah batteries. Dimensions: High 500- Width 390- Depth 145mm.

Similar feature than AE/C5-4P panel but with 8 conventional detection zones. Includes selection of push buttons zone or detectors zone, display output and connection to the module by AE/C5-R8 relay. Dimensions: 340X290X100. Allows the control by remote through AE/C5-IDC module and AGE44 telemonitoring software.

Microprocessed modular panel made according EN 54-2 and EN 54-4. Modular capacity between 8, 12 and 16 conventional detection zones with active end of line. 2 EVACuation monitored output. Fire and fauilure relay. Test zones mode. Control keys and LEDs for status indication. Capacity for 12V/18Ah battery. Dimensions: 462 X 345 X 120.

Metal alarm bell of 6" for indoors. Certified in accordance with EN54-3. Provided of micromotor to activate the ringing mechanism, red painted. Sound power: 95dB. Power supply: 24VDC. Consumption: 25mA. Weight: 0,45kg. Protection: IP21.

Fire control panel and external alarms repetition for three different operators. Contains power supply and battery charger. Fire detection loop. Automatic extinction control circuit which provides a monitored output the activation of an electrovalve. Relay output (24 V). 12 VDC output (500 mA.) for several purposes outside the panel unit. 30 external alarm input control, normally open or normally closed selectable by a commutator, (outputs for 30 alarms through potential-free relays normally open or closed selectable by a selector). For the first 14 outputs plus fire alarm and generl fail alarm there are three Sub-D connectors of 37 pins to be used independently by each operator. This information is simultaneously repeated in the three connectors. For the remaining 16 outputs, there is a single Sub-D, 37 pin connector. Repetition by two commuted 2 A relays, voltage free in outputs 1 and 30. Control of 1 FIRE output and 1 GENERAL FAIL output normally closed through the 3 first Sub-D ,37 pin connectors. 2 A commuted relays, voltage free for: Fire alarm, general fire alarm (normally energized); Ventilation stop, selectable with fire level 1 or 2; Optical and acoustic signals, as well as the necessary controls to manage the installation.

Conventional alarm push button appropriate for outdoor use, IP65 in accordance with EN54-11 standard. Dispose of micro-switch with load resistor of 470 ohm or 680 ohm, verification system with reset key and LED alarm. Allows the mounting of plastic plate calibrated to be located and don´t break or of breakable glass both provided. ABS box of 85 x 85 x 58 mm. Certified CE according to DPC. Certified LPCB. Protection: IP65.

Developped and made by AGUILERA™ Electrónica in accodance with EN54-11 standard. Equipped with: Micro-switch, Alarm and Self-Check LED, verification system with reset key, plastic plate calibrated to be located and don"t break. Push button with protection cover. Placed in ABS box. Certified CE emitted by LPCB. Dimensions: 98 x 95 x 39 mm.

Low consumption programmable siren for the algorithmic series SA. It occupies 1 address in the algorithmic loop. Selection of 8 acoustic tones through dilswitch. It has an anchor to attach it to the AE / SA-ZB2 socket. It also includes a socket for inserting the SA series algorithmic detectors. Programmable siren. Base for algorithmic detector equipped with low consumption siren. The siren is fed directly from the loop. 8 acoustic tones selectable by dilswitch. Power between 17 and 27 VDC. Standby consumption: 1.1mA. Siren consumption activated: 2.8 to 9.0 mA (depending on tone). Max acoustic power: 88 dB (A) @ 1m (depending on tone). Dimensions with base: Ø 104 mm. Height with base 40 mm. Material: ABS.

Base for algorithmic detector equipped with siren and low consumption light bulb. The siren and the focus are powered at 24 Vdc from a monitored output module of the algorithmic control unit. The detector is connected to the socket's own connectors. Maximum consumption 10 mA. Sound level 90 dB (A).