Carbon monoxide diffusion detector (CO) sensor for COsensor system designed according to the European standard EN 50545-1 and UNE 23300 certified. The sensor is designed to work with all models of COsensor plants, both conventional (CCO and MiniCO models) as addressable (ZafirCO). In this sense, the sensor, when the control panel is turned on, recognizes the model and adapts its communication to that required by it. The detector sensor is based on electrochemical technology that allows it to respond appropriately to CO concentrations in the environment, and send this information to the plant. In this way the plant will act appropriately, activating the necessary ventilation and alarms.

Resettable fire alarm button for conventional fire detection system. It incorporates an action indicator (red led) that lights up when manually activated (alarm). Push button easily resettable by actuating the yellow switch on the front face. Transparent protective cover on the drive face to prevent accidental pulsation. Immediate visual recognition of the alarm status by the permanent activation of the led and the triggering of a yellow tab at the bottom of the drive face. Certified by AENOR according to the EN 54-11 standard and CE marked according to the European Regulation on Construction Products (EU) Nº305 / 2011.

Conventional thermal detector for fire detection. The detector is composed of an element sensitive to temperature variations produced by any combustion process. The value measured by this element is compared with a preset reference value that causes the thermal fire detector to enter the alarm state when the temperature reaches 55ºC. Possibility of connection to a remote action indicator. Easy connection, without polarity. Head and socket easily installed, interchangeable throughout the A30X range, and made of heat-resistant white ABS.