English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 140
    19'' Rack Mount for LDA® ONE-500 [LDAONERMA2S01]
    19'' Rack Mount for LDA® ONE-500
    Ref.: LDAONERMA2S01
    The ONE-RMA2 bracket allows you to install a ONE-500 unit in a 19'' rack cabinet. At just 2U tall (with ONE-500 installed) it provides a solid mounting base for your gear.
    V.A.T. included
    52.59 €
    230VAC Feeder for 1 to 10 DURÁN® Standgas™ [SALIM230]
    230VAC Feeder for 1 to 10 DURÁN® Standgas™
    Ref.: SALIM230
    This source allows to power supply simultaneously up to 10 Standgas™ units. Technical specifications: Input voltage 100-240V AC 50-60Hz, Output: 12V 5A DC.
    V.A.T. included
    43.87 €
    Auxiliary DURÁN® 13.8VDC 10.8Amp (V2) Power Supply Unit [VFAAUX02]
    Auxiliary DURÁN® 13.8VDC 10.8Amp (V2) Power Supply Unit
    Ref.: VFAAUX02
    DURÁN® Auxiliary power supply 13.8VDC 10.8Amp (V2).
    V.A.T. included
    198.03 €
    Base for CO/NO2 DURPARK™ Detector [DKBADT]
    Base for CO/NO2 DURPARK™ Detector
    Ref.: DKBADT
    Base for DURPARK™ detectors. Especially design for parkings uses. ABS. IP20.
    V.A.T. included
    8.89 €
    Base for DURPARK™ RS485 CO/NO2 Detector [DKBADTRS]
    Base for DURPARK™ RS485 CO/NO2 Detector
    Ref.: DKBADTRS
    Base for DURPARK™ RS485 detectors. Especially design for parkings uses. ABS. IP20.
    V.A.T. included
    11.27 €
    BUS ACSI Adapter for LDA® ZES-22 [LDAZES22ACSIS01]
    BUS ACSI Adapter for LDA® ZES-22
    Ref.: LDAZES22ACSIS01
    Adaptation unit for ZES-22 digital matrices that allows to inject up to 8 MPS-8Z microphones with or without expansion keyboards. It has a bus power input that allows the MPS series microphones to be used without local source, only connected by bus cable. It has protection against short circuit and incorrect polarity. Docks directly onto the ZES-22 drive allowing direct connection to an ACSI bus.
    V.A.T. included
    166.51 €
    Cobranet ZES22 LDA® Audio Converter [LDAZES22S02]
    Cobranet ZES22 LDA® Audio Converter
    Ref.: LDAZES22S02
    The ZES-22 digital audio processor of the SONORA family is a versatile equipment that allows for high-performance audio installations with high flexibility in terms of size, configuration or the location of equipment in large buildings with the only requirement of have an Ethernet connection. It consists of up to 4 fully configurable audio inputs or outputs. These analog balanced audio inputs / outputs offer excellent performance through the use of quality A / D and D / A converters. The input sensitivity is adjustable and the output levels standardized for 1Vp balanced signal. It offers an extended dynamic range and gain control.
    V.A.T. included
    1,512.23 €
    Detector Autónomo de Gases Explosivos (Butano-Metano-Hidrógeno) Standgas™ HC con Relé [SPLFBPNMR]
    Detector Autónomo de Gases Explosivos (Butano-Metano-Hidrógeno) Standgas™ HC con Relé
    Ref.: SPLFBPNMR
    Detector autónomo diseñado para la detección de gases explosivos con tecnología catalítica (pellistor), para un rango de detección de 0 al 100% L.I.E. y resistente a los vapores de siliconas. Disponible también una versión especial con tres salidas de relé programables. Indicaciones ópticas de estados y avería del sensor. Selección del gas a detectar mediante jumper. Estado inicial de relé de alarma programable. Niveles de alarma programables, hasta 3 niveles versión especial o dos niveles mas una salida de avería. Retardo de activación de relé de alarma programable, fijo versión especial. Grado de protección IP65.
    V.A.T. included
    379.46 €
    DURÁN® 4B Surface Base with Line Isolator [IA4B-I]
    DURÁN® 4B Surface Base with Line Isolator
    Ref.: IA4B-I
    For FC400 and 600 series detectors. 4”.
    V.A.T. included
    20.35 €
    DURÁN® 4B Surface Base [IA4B]
    DURÁN® 4B Surface Base
    Ref.: IA4B
    For FC400 and 600 series detectors. 4”.
    V.A.T. included
    5.18 €
    DURÁN® 4B-DHM Anti-humidity Base [IADHM4B]
    DURÁN® 4B-DHM Anti-humidity Base
    Ref.: IADHM4B
    4” IP55 anti-humidity base for DURÁN® detectors.
    V.A.T. included
    15.11 €
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000 ppm 4-20mA Gas Detector with Relay [DIRY4CO2r]
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000 ppm 4-20mA Gas Detector with Relay
    Ref.: DIRY4CO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    934.41 €
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay [DIRYCO2r]
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay
    Ref.: DIRYCO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    845.48 €
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector [DIRYCO2]
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector
    Ref.: DIRYCO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    738.75 €
    DURÁN® DIREX™ IR CO2 0-2%vol. 0-20.000ppm 4-20mA Gas Detector [DIRY4CO2]
    DURÁN® DIREX™ IR CO2 0-2%vol. 0-20.000ppm 4-20mA Gas Detector
    Ref.: DIRY4CO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    830.06 €
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector with Relay [DIRY-HCr]
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector with Relay
    Ref.: DIRY-HCr
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    845.48 €
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector [DIRY-HC]
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector
    Ref.: DIRY-HC
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    738.75 €
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector with Relay [DIRY4-HCr]
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector with Relay
    Ref.: DIRY4-HCr
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    934.41 €
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector [DIRY4-HC]
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector
    Ref.: DIRY4-HC
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    830.06 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector with Relay [DIRY4LXCO2r]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector with Relay
    Ref.: DIRY4LXCO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,283.04 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector [DIRY4LXCO2]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector
    Ref.: DIRY4LXCO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,197.66 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay [DIRYLXCO2r]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay
    Ref.: DIRYLXCO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,179.87 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector [DIRYLXCO2]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector
    Ref.: DIRYLXCO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,119.40 €
    DURÁN® DIREX™ X IR Hidrocarbon RS485 Gas Detector with Relay [DIRYLX-HCr]
    DURÁN® DIREX™ X IR Hidrocarbon RS485 Gas Detector with Relay
    Ref.: DIRYLX-HCr
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,179.87 €
    SYSAWAY© 2024 All rights reserved