English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2731
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    Standgas™ Standalone Detector HC BUT/PROP/NAT/H2 with Relay [SPLFBPNr]
    Standgas™ Standalone Detector HC BUT/PROP/NAT/H2 with Relay
    Ref.: SPLFBPNr
    Independent detector by catalytic technology for the detection of butane-propane, methane- natural gas and hydrogen with relay. Independent functioning: without connection to any central. Allows the automatic selection of the gas to detect, between all the available gases, through a protocol established with a jumper. Detection range from 0 to 100% L.I.E. Optical state and sensor breakout indicator. 1 alarm relay output programmable between 2 levels (20% LIE / 50% LIE), instant/retarded disconnection, programmation retard of connection and initial state of the relay in repose. Power 10V to 30V DC. Calibrated in factory with span gas. No need to recalibrate in the installation. Easy verification and maintenance operations by a single worker. Resistant to silicone vapours (HDMS).
    V.A.T. included
    278.66 €
    AGUILERA™ Direction Programmer with 9V Alkaline Battery [AE/SA-PRG]
    AGUILERA™ Direction Programmer with 9V Alkaline Battery
    Ref.: AE/SA-PRG
    Portable device to program the number of idendification code of each algorithm that allows to: Record the address of the equipment , read the stored adress, inhibit/authorize individually the LED flash of the device. The programmation process is individual for each device and can be done from the algorithm central.
    V.A.T. included
    128.07 €
    KILSEN® SW for Sensor Cable Configuration [AACU-PCC]
    KILSEN® SW for Sensor Cable Configuration
    Ref.: AACU-PCC
    Configuration software with USB cable, to configure AACULP (Cable sensor units of UTC™ KILSEN® analogue).
    V.A.T. included
    164.38 €
    UTC™ Aritech™ (10 Pack) 400/500/700/2000 Replacement Chamber [211]
    UTC™ Aritech™ (10 Pack) 400/500/700/2000 Replacement Chamber
    Ref.: 211
    The 211 is a replacement optical chamber for Aritech 400, 500, 700 and 2000 series detectors. Easy replacement is supported by a detector design that allows a contaminated (dirty) chamber to be removed and replaced by a clean chamber without the need for special tools. As simple click-out, click-in mechanism makes replacement possible in a couple of seconds. The detector automatically re-calibrates the detection sensitivity on first start up.
    V.A.T. included
    135.63 €
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Relay Output [DP721R]
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Relay Output
    Ref.: DP721R
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    74.74 €
    UTC™ Aritech™ 700 Series 6 Terminal Conventional 2-wire Base - 100 mm [DB702]
    UTC™ Aritech™ 700 Series 6 Terminal Conventional 2-wire Base - 100 mm
    Ref.: DB702
    The DB702 is a conventional fire detector base used for all 700 series conventional fire detectors. It includes a normally closed continuity switch to allow for easy cable testing during installation. Inserting a detector into the base “opens” the continuity switch in the base to allow for standard open circuit monitoring. A locking mechanism implementation in conjunction with the detector allows for the detector to be safeguarded against unauthorized removal.
    V.A.T. included
    4.79 €
    UTC™ Aritech™ 700 Series Conventional Heat Detector w/ Relay Output, 57°C Class A2 [DT713-5R]
    UTC™ Aritech™ 700 Series Conventional Heat Detector w/ Relay Output, 57°C Class A2
    Ref.: DT713-5R
    The 700 series conventional detector line includes a range of temperature detectors: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 57°C and built in rate-or-rise functionality. Automatic self diagnostics: Dynamic full detector and sensitivity test. High false alarm immunity. Built-in relay option. Separate fire and fault LED. 12 - 24 VDC operation. Polarity insensitive. Part of a full range: optical, heat and optical/heat multi criteria detectors. EN54 approved and CPR certified. The DT713-5R has the same specifications as the DT713-5, but in addition includes a built in potential free changeover relay.
    V.A.T. included
    64.05 €
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Remote Indicator Output [DP721I]
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Remote Indicator Output
    Ref.: DP721I
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    27.35 €
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 57°C Class A2 [DT713-5]
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 57°C Class A2
    Ref.: DT713-5
    The 700 series conventional detector line includes a range of temperature detectors: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 57°C and built in rate-or-rise functionality. Automatic self diagnostics: Dynamic full detector and sensitivity test. High false alarm immunity. Built-in relay option. Separate fire and fault LED. 12 - 24 VDC operation. Polarity insensitive. Part of a full range: optical, heat and optical/heat multi criteria detectors. EN54 approved and CPR certified.
    V.A.T. included
    19.59 €
    KILSEN® Conventional Fire Panel with User Interface - 2 Zones [KFP-CF2-09]
    KILSEN® Conventional Fire Panel with User Interface - 2 Zones
    Ref.: KFP-CF2-09
    Conventional fire detection panel (.net) of 2 microprocessed zones with possibility to combine in a zone push buttons and detectors, with two outputs for monitored sounders (250mA c/u), 2 voltage free outputs (1,2, 24VDC) for alarms and failure and 2 configurable inputs. Upgradeable firmeware. Allows the complete communication with out analogical panels through RS-485 connection, as well as the connection between conventional panels (Maximum 64 zones). The connection requires 2010-1-NB card (Not included). Zones test for a unique person. Supervisión del fallo de deriVACión a tierra. Can include module of 4 outputs (2010-1-RB and 2010-1-SB). Optical/acoustic indications by zones. Certified: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Weight: 2,8Kg. Dimensions: 435x320x134mm.
    V.A.T. included
    236.89 €
    PFANNENBERG™ IP66 EN54/3 and EN54/23 Flash Sounder with Transparent Lens [PA X 1-05-CL]
    PFANNENBERG™ IP66 EN54/3 and EN54/23 Flash Sounder with Transparent Lens
    Ref.: PA X 1-05-CL
    Sounder and flash light combined. 24VDC IP66 105 db. 5 joules Internal adjustable volume. Shockproof. RAL3000 red body, transparent lens. Temperature -40 to + 55º C. EN 54.3 and EN 54.23
    V.A.T. included
    788.84 €
    KAC® Launching Extinguishing Push Button IP67 [W3A-Y000SG-K013-65]
    KAC® Launching Extinguishing Push Button IP67
    Ref.: W3A-Y000SG-K013-65
    Launching extinguishing push button IP67 by glass breakage, with NA or NC conctact, in yellow color for fire extinguishing systems. Design for an exlusive use indoor and surface mounting or recessed through standard box. Includes plastic protection cover, SUS758 glass and PS010W surface mounting box. For aggressive environments its recommended to install it in STI3150 box.
    V.A.T. included
    301.48 €
    Prohibition and Fire Signboard Type 3 (Plastic Sheet - Class B) [P-178-B]
    Prohibition and Fire Signboard Type 3 (Plastic Sheet - Class B)
    Ref.: P-178-B
    Indication Signboard for fire protection element. Made of methacrylate. Designed under UNE 23035 part 1, 2, 3 and 4 standard of 1995 and 1994. Photoluminescent. FIRE DOOR - KEEP CLOSED.
    V.A.T. included
    3.21 €
    AGUILERA™ 50Kg Retainer [AE/V-R2450B15]
    AGUILERA™ 50Kg Retainer
    Ref.: AE/V-R2450B15
    Retainer 50 Kg/490N for floor with extendable arm from 15 to 18 cm, with traction plate, release button, 2 protection diodes. EN 1155 certified. Protection: IP40. Consumption: 45mA 24Vcc.
    V.A.T. included
    Consult
    AGUILERA™ Algorithmic Detector Base with Sounder + Spotlight (Low Consumption) [AE/SA-SBF]
    AGUILERA™ Algorithmic Detector Base with Sounder + Spotlight (Low Consumption)
    Ref.: AE/SA-SBF
    Low consumption programmable siren for the algorithmic series SA. It occupies 1 address in the algorithmic loop. Selection of 8 acoustic tones through dilswitch. It has an anchor to attach it to the AE / SA-ZB2 socket. It also includes a socket for inserting the SA series algorithmic detectors. Programmable siren. Base for algorithmic detector equipped with low consumption siren. The siren is fed directly from the loop. 8 acoustic tones selectable by dilswitch. Power between 17 and 27 VDC. Standby consumption: 1.1mA. Siren consumption activated: 2.8 to 9.0 mA (depending on tone). Max acoustic power: 88 dB (A) @ 1m (depending on tone). Dimensions with base: Ø 104 mm. Height with base 40 mm. Material: ABS.
    V.A.T. included
    Consult
    AGUILERA™ Algorithmic Detector Base with Sounder [ AE/SA-ASG3S]
    AGUILERA™ Algorithmic Detector Base with Sounder
    Ref.: AE/SA-ASG3S
    Base for algorithmic detector equipped with siren. The siren is powered at 24 Vdc from a monitored output module of the algorithmic panel. The detector is connected to the socket's own connectors. Maximum consumption 5 mA. Sound level 90 dB (A).
    V.A.T. included
    83.25 €
    Base for AGUILERA™ Algorithmic Detector with Sounder (Low Consumption) [AE/SA-SB]
    Base for AGUILERA™ Algorithmic Detector with Sounder (Low Consumption)
    Ref.: AE/SA-SB
    Low consumption programmable siren for the algorithmic series SA. It occupies 1 address in the algorithmic loop. Selection of 8 acoustic tones through dilswitch. It has an anchor to attach it to the AE / SA-ZB2 socket. It also includes a socket for inserting the SA series algorithmic detectors. Programmable siren. Base for algorithmic detector equipped with low consumption siren. The siren is fed directly from the loop. 8 acoustic tones selectable by dilswitch. Power between 17 and 27 VDC. Standby consumption: 1.1mA. Siren consumption activated: 2.8 to 9.0 mA (depending on tone). Max acoustic power: 88 dB (A) @ 1m (depending on tone). Dimensions with base: Ø 104 mm. Height with base 40 mm. Material: ABS.
    V.A.T. included
    94.86 €
    AGUILERA™ Algorithmic Detector Base with Sounder + Spotlight [ AE/SA-ASG3]
    AGUILERA™ Algorithmic Detector Base with Sounder + Spotlight
    Ref.: AE/SA-ASG3
    Base for algorithmic detector equipped with siren and low consumption light bulb. The siren and the focus are powered at 24 Vdc from a monitored output module of the algorithmic control unit. The detector is connected to the socket's own connectors. Maximum consumption 10 mA. Sound level 90 dB (A).
    V.A.T. included
    163.66 €
    AGUILERA™ 2-Loop Analog Cards [AE/SA-TA]
    AGUILERA™ 2-Loop Analog Cards
    Ref.: AE/SA-TA
    Two analog loop control unit with independent microprocessor. The capacity of each loop is 125 pieces of equipment, to which the detectors, buttons, maneuver modules, control modules and other elements that make up the installation are connected. Total control capacity of 250 teams. It has light indicators to control the correct operation and communications with the equipment and the control unit.
    V.A.T. included
    Consult
    AGUILERA™ Master Module [AE/94-M]
    AGUILERA™ Master Module
    Ref.: AE/94-M
    Addressable module developed to control a series of conventional detectors or pushbuttons in a 2-wire controlled loop, which can correspond to a specific area, sector or room.
    V.A.T. included
    Consult
    AGUILERA™ Assistance System for People with Disabilities [AE/DDA]
    AGUILERA™ Assistance System for People with Disabilities
    Ref.: AE/DDA
    Warning and assistance system for disabled people. It is a 2-wire system, which consists of a warning button with double handle, acoustic and luminous indicator, reset button and power supply, allows, through an algorithmic module, its integration in the SA series fire panels from AGUILERA® Electrónica.
    V.A.T. included
    Consult
    AGUILERA™ Analogical MCP [AE/94-P1]
    AGUILERA™ Analogical MCP
    Ref.: AE/94-P1
    Identifiable alarm button developed and manufactured according to EN 54-11: 2000 standard. Equipped with addressable module, provided with: microswitch, alarm and self-check led, verification system with reset key, calibrated sheet so that it is locked and does not break, and microprocessor that controls its operation and informs the central of: "Alarm" , "No answer" and "Return to rest". Located in ABS box with measurements and serigraphy according to standards. Supply voltage: 18 - 27 VDC. Consumption at rest: 1.5 mA. Consumption in alarm: 4.5 mA. Temperature range: 0º to 60º C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 95 x 95 x 35 mm. LED: Activation: fixed red. Communications: flashing red.
    V.A.T. included
    Consult
    AGUILERA™ Optical Smoke Detector [AE/94-OPA2]
    AGUILERA™ Optical Smoke Detector
    Ref.: AE/94-OPA2
    Optical smoke detector that operates according to the principle of scattered light (Tyndall effect). It is indicated to detect fires in its first phase of smoke, before flames are formed or dangerous temperature increases occur. Formed by a dark camera complemented by a transmitter and a receiver that detect the presence of particles inside, governed by a microcontroller that is programmed from the central setting the operating parameters. Certificate according to the Construction Products Directive (DPC.) According to Standard EN 54-7: 2001. Supply voltage: 20-27 V. Consumption at rest: 3 mA. Consumption in alarm: 13 mA. Temperature range: 0º - 60º C. Humidity range: 10% - 90%. Housing material: ABS white. Alarm: fixed red. Dimensions: Ø105 mm. 76 mm with high base.
    V.A.T. included
    Consult
    AGUILERA™ Thermal Detector [AE/94-TVA]
    AGUILERA™ Thermal Detector
    Ref.: AE/94-TVA
    Microprocessed temperature detector that programmed from the control unit controls the temperature parameters in two levels: Differential and thermal. The thermal detectors are specially designed for those places where the fire starts with sudden rises in temperature or where smoke detectors are not recommended due to the existence of combustion gases in the environment.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved