52 Special Series Electric Lock for fire doors, NORMAL (N), Abrepuertas eléctrico Serie Especial 52 para puertas cortafuego NORMAL (N), AC or DC to be chosen. Mechanism case only. RF (fire resistance) and EI (integrity and watertightness) approved. Totally made of steel.

Programmation software, offline, for ID3000 analogue panels, allows the system configuration and edition of analogue devices (Detectors and modules). Requires a compatible computer and an Windows XP or superior operating system. Includes a manual and cable for PC connection.

Programmation Software, offline, for ID50 and ID60 analogue panels. Allows the system configuration and edition of analogue devices (Detectors and modules). Requires a compatible computer and an Windows XP or superior operating system. Includes a manual and cable for PC connection.

CD, USB Drive and USB cable for programmation of PEARL series panels.

Extension for GT graphic software to manage an other VISION-PLUS2 panel.

Program for graphic management of VISION-PLUS2 panel, for representation and full system and commands controlled from a PC. Allows full control for panels and remote terminal emulation with access to menus and controls. Includes expiration management of PCI devices and automatic send of email.

Resetable hand push button through key via radio design in accordance with EN54-11. Maintain bidirectional communication with the radio interface occupying a direction in the loop module. Dispose of a bicolor LED red/green that provides informations about the status device, signal intensity and batteries status. Includes a surface box and two lithium batteries of 3 volts. Quick, easy and cost-effective installation. Principal battery (CR123) and backup battery (CR2032).

Flame detector UV (ultraviolet) and IR (infrared), with the same performances as S40/40L, but with the exception that the IR sensor works a wavelength of 4,5?m and is only suitable for hydrocarbon fires. Requires S40/40-001 support and a power of 24VDC 150mA. For explosive zones, also requires a F-81212N stuffing box. Possibility of models with analogical output of 4-20mA and without assistant relay. consult availability.

Flame detector UV (ultraviolet) and IR (Infrared) in aluminium case certified CPD EN54-10 and SIL2. Detects fires from hydrocarbon, hydroxide and hydrogen and metals or non organic matter. Incorporates a microprocessor to analyze the signals of the flames, multiple adjustable alarm levels. Comes in aluminium flameproof case. Includes relay output for alarm, breakout and assistant relay NA. with NPT thread. Requires S40/40-001 support and power of 24VDC 150mA. For explosive zones, requires also F-81212N stuffing box. Possibility of models with analogical output of 4-20mA and without assistant relay. Consult availability.

Steel Cylinder compatible with any type of autonomous breathing equipment. Manufactured in special alloys for works at 300bar with the best balance between weight and performance for this type pressure vessels.

High-performance intervention equipment that is comfortable and durable. Protects in any high risk situation. It is the ideal equipment for the industry and is also certified for firefighters. Components: Reducer, high pressure reliable and safe. Ergonomic harness, with padded harnesses, made with high density aramid fiber tapes, which withstand high temperatures, and by-pass of external air supply. Regulating valve, Zenith automatic positive pressure dosing with connection to the mask by bayonet. Panoramasque complete mask, with triple anchorage fixation system or connection to the integral F1 system helmet. High pressure analog manometer integrated in the harness with bar reading and PSI with integrated sound alarm at 55 bar.

Equipped fire hose with semi-rigid hose, folding. Maximum working pressure of 12 bar (1,2 Mpa) according to UNE-EN 694:2001. Pinted in RAL 3000 epoxy polyester (Red). With glass door, hinge and easy to open locker . With winder for 490mm plate disk, with axial supply and provided with double joint arm. With a triple effect lance (Connected to the hose through a threaded spindle): Stream, spray and closure. Ball valve, made in hot stamped brass. Includes a sphere pressure gauge of 50mm diameter (scale from 0 to 16 bar).

Extinguisher in mobile cart with 50kg charge, steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. Extinguishing agent: ABC Powder. Propellant agent: nitrogen (350gr). Operating pressure: 15 Kg/cm2. Minimal pressure, test: >55 Kg/cm2. RAL 3000 Epoxy paint of 110 micron thick. With brass valve, steel bolt. Hose made in reinforced rubber with connection to the extinguisher. Includes cart with wheels. Maximum operating temperature: -20ºC to +60ºC.

Extinguisher in mobile cart with 25kg charge, steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. Extinguishing agent: ABC Powder. Operating pressure: 15 Kg/cm2. Minimal pressure, test: >55 Kg/cm2. RAL 3000 Epoxy paint of 110 micron thick. With brass valve, steel bolt. Hose made in reinforced rubber with connection to the extinguisher. Includes cart with wheels. Maximum operating temperature: -20ºC to +60ºC.

5Kg Portable fire extinguisher (7,5 Liters). Extinguishing agent: CO2. With test efficiency of 89B. Consist of a steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. RAL 3000 Epoxy paint of 110 micron thick. With brass valve, with polypropylene probe tube. bolt steel. Hose made in reinforced rubber with connection to the extinguisher and in the outlet a vase diffuser. Includes steel support. Dimensions: 740 mm x ø 137,30 mm. Maximum operating temperature: - 30 ºC to + 60 ºC.

2Kg Portable fire extinguisher (3 Liters). Extinguishing agent: CO2. With test efficiency of 34B. Consist of steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. RAL 3000 Epoxy paint of 110 micron thick. With brass valve, with polypropylene probe tube. bolt steel. Hose made in reinforced rubber with connection to the extinguisher and in the outlet a vase diffuser. Includes steel support. Dimensions: 550 mm x ø 102,50 mm. Maximum operating temperature: - 30 ºC to + 60 ºC.

6kg Portable fire extinguisher. Extinguishing agent: crystalline chemical powder. For class A,B,C fires. With test efficiency of 27A/183B. Consist of two parts of steel sheets not alloyed for embossing or cold confirmation according to UNE 36.086, with denomination. DC-04 Cold rolled sheet, and united by semiautomatic but weld in atmosphere inert a mix of CO2 gas and argon. RAL 3000 Epoxy paint of 110 micron thick, covered in conservatory after receiving prior treatment with phosphates in degreasing tunnel and deionised water. With brass valve, with intern pressure gauge and intern security valve of pressurized self-test. Hose made in reinforced rubber of 450mm lenght with connection to the extinguisher and in the outlet a duck-billed diffuser. Dimensions of 510 mm x ø 150 mm. Maximum operating temperature: 20 ºC to + 60 ºC.

Extinguisher in a Mobile cart with 10kg (14,93 liters) charged, made in alloyed steel sheets with 34CrMo4 welding . Extinguishing agent: CO2. With test efficiency of 89B. RAL 3000 Epoxy paint of 110 micron thick. With lativan valve, with steel bolt. Hose made in reinforced rubber with connection to the extinguisher. Includes cart with wheels. Operating temperature: -20 ºC and + 60 ºC. Dimensions: 963 mm x ø 154 mm.

2 Extinguisher in a Mobile cart with 10kg (14,93 liters) charged, each one made in alloyed steel sheets with 34CrMo4 welding . Extinguishing agent: CO2. With test efficiency of 89B. RAL 3000 Epoxy paint of 110 micron thick. With lativan valve, with steel bolt. Hose made in reinforced rubber with connection to the extinguisher. Valve type lever. Includes cart with wheels. Operating temperature: -20 ºC and + 60 ºC. Dimensions: 963 mm x ø 154 mm.