Portable device to program the number of idendification code of each algorithm that allows to: Record the address of the equipment , read the stored adress, inhibit/authorize individually the LED flash of the device. The programmation process is individual for each device and can be done from the algorithm central.

Conventional fire detection panel (.net) of 2 microprocessed zones with possibility to combine in a zone push buttons and detectors, with two outputs for monitored sounders (250mA c/u), 2 voltage free outputs (1,2, 24VDC) for alarms and failure and 2 configurable inputs. Upgradeable firmeware. Allows the complete communication with out analogical panels through RS-485 connection, as well as the connection between conventional panels (Maximum 64 zones). The connection requires 2010-1-NB card (Not included). Zones test for a unique person. Supervisión del fallo de deriVACión a tierra. Can include module of 4 outputs (2010-1-RB and 2010-1-SB). Optical/acoustic indications by zones. Certified: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Weight: 2,8Kg. Dimensions: 435x320x134mm.

Two analog loop control unit with independent microprocessor. The capacity of each loop is 125 pieces of equipment, to which the detectors, buttons, maneuver modules, control modules and other elements that make up the installation are connected. Total control capacity of 250 teams. It has light indicators to control the correct operation and communications with the equipment and the control unit.

Addressable module developed to control a series of conventional detectors or pushbuttons in a 2-wire controlled loop, which can correspond to a specific area, sector or room.

Microprocessed unit that manages communications and control for 2 voltage-free inputs. It allows you to customize each entry with the location of the equipment you control and its status change (activated extractor, closed door in the kitchen, ...). Each input can be selected by open contact (SELECTOR IN NO POSITION) or contact closed (SELECTOR IN NC POSITION). Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27 VDC. Consumption at rest: 3.3 mA. Consumption in alarm: 13 mA. (2 inputs activated). Inputs: Voltage free contacts. Selectable by open or closed contact. Temperature range: 0º to 60º C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Activation of each input: fixed yellow. Communications: flashing red. Clamping: 4 Ø3.5 mm holes.

Microprocessed unit that manages communications and control for 8 voltage-free inputs. It allows to customize each entry with the location of the equipment it controls and its status change (valve opened in garage, ...). Each input can be selected by open contact (SELECTOR IN NO POSITION) or contact closed (SELECTOR IN NC POSITION). Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27 VDC. Consumption at rest: 3.5 mA. Inputs: Voltage free contacts. Selectable by open or closed contact. Temperature range: 0º to 60º C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Activation of each input: fixed yellow. Communications: flashing red. Clamping: 4 holes Ø3.5 mm.

Microprocessed unit that manages communications and control for 2 relays (2 different maneuvers). Each output can be customized in the control panel with the name of the place and the maneuver that it executes, and programmed to act with alarms or events of different equipment of the installation. Both outputs are: voltage free (contacts normally open NO, normally closed NC) and with voltage (24 V). Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27 VDC. Consumption at rest: 6 mA Consumption at maximum alarm: 54 mA Outputs: Voltage-free contacts. (NA, COMM, NC) 24 V. Maximum resistive load = 2 A / 30 VDC - 0.6 A / 125 VAC. Maximum switching voltage = 125 VDC - 125 VDC. Maximum switching power = 60 W - 62.5 VA. Temperature range: 0 ° to 60 ° C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Activation of each output: fixed red. Communications: flashing red. Fastening: 4 holes 03.5 mm.

Microprocessed module equipped with a relay output, with line supervision. The output can be customized in the control panel with the name of the place and the maneuver that it executes, and programmed to act with alarms or events of different equipment of the installation. The module monitors faults by open line or by short circuit in the output loop. The output is with voltage: 24 VDC in alarm. Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27V. Consumption at rest: 7 mA. Consumption in alarm: 40 mA. Output: 24 V / 1 A max. Temperature range: 0º to 60º C. Cable cross section: 2 x 1.5 mm² + 1 x 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Output activation: fixed red. Supervised loop fault: fixed yellow. Communications: flashing red. Fastening: 4 holes 03.5 mm.

Fire control panel and external alarms repetition for three different operators. Contains power supply and battery charger. Fire detection loop. Automatic extinction control circuit which provides a monitored output the activation of an electrovalve. Relay output (24 V). 12 VDC output (500 mA.) for several purposes outside the panel unit. 30 external alarm input control, normally open or normally closed selectable by a commutator, (outputs for 30 alarms through potential-free relays normally open or closed selectable by a selector). For the first 14 outputs plus fire alarm and generl fail alarm there are three Sub-D connectors of 37 pins to be used independently by each operator. This information is simultaneously repeated in the three connectors. For the remaining 16 outputs, there is a single Sub-D, 37 pin connector. Repetition by two commuted 2 A relays, voltage free in outputs 1 and 30. Control of 1 FIRE output and 1 GENERAL FAIL output normally closed through the 3 first Sub-D ,37 pin connectors. 2 A commuted relays, voltage free for: Fire alarm, general fire alarm (normally energized); Ventilation stop, selectable with fire level 1 or 2; Optical and acoustic signals, as well as the necessary controls to manage the installation.

Unit developed and made by AGUILERA™ ELECTRÓNICA through UNE EN54-2 standards to control fires, technical signals and other parameter changes which occur in mobile booths and similar facilities. Contains a stabilized power supply , powered at 230 V with input protections, 27 y 12 VDC outputs and a battery charger. Monitored loop which controls a detector and fire switches zone, with signaling of: 1st level of fire, 2nd level, breakdown and service. Monitored loop for utomatic fire extinction, programmable to releas the extinguisher agent with the 1st or 2nd fire level. Relays: for fire, general breakdown supervised, air conditioned pause and repetition of external alarms, 1 and 14. Controls from 14 to 30 inputs depending on the model. These inputs are individually selectable by contact, normally open or closed, which are transmitted by sub D37 pin connectors (2A relay outputs, voltage free by individually selectable contact, open or closed). Measuress: 375 x 280 x 130 mm.

2 monitored detection zones. Programmable functioning mode as: Double detection; Crossed detection; Mixed. Monitored detection zone for launching of the extinction push button. Monitored input for pausing extinction button. Launching and stop push buttons included in the motherboard. 2 independent monitored inputs for monitoring the pressure switch or for weighing and flow control. Monitored eVACuation output and output for the fire extinguishing poster. Mode selection key: automatic, manual or disarmed. Display with indications of the remaining time for the discharge. Programmable time before the extinction between 0 and 60 seconds. Optional relays to repeat the states of the panel unit. Measures: 320 x 272 x 125 mm. Can contain 2 12V/7Ah batteries.

Unit developed and made by AGUILERA™ ELECTRÓNICA through UNE EN54-2 standards to control fires, technical signals and other parameter changes which occur in mobile phone booths and similar facilities. Contains a stabilized power supply, powered at 230 V with input protections, 27 and 12 VDC outputs and a battery charger. Monitored loop which controls a detector and fire switches zone, with signaling of: 1st level of fire, 2nd level, breakdown and service. Monitored loop for automatic fire extinction, programmable to release the extinguishing agent with the 1st or 2nd fire level. Relays: for fire, general breakdown supervised, air conditioned pause and repetition of external alarms, 1 and 14. Controls from 14 to 30 depending on the model. These inputs are individually selectable by contact, normally open or closed, which are transmitted by sub D37 pin connector ( 2A relay outputs, voltage free by individually selectable contact, open or closed). Measures: 375 x 280 x 130 mm.

2 monitored detection zones. Programmable functioning mode as: Double detection; Crossed detection; Mixed. Monitored detection zone for launching of the extinction push button. Monitored input for pausing extinction button. Launching and stop push buttons included in the motherboard. 2 independent monitored inputs for monitoring the pressure switch or for weighing and flow control. Monitored eVACuation output and output for the fire extinguishing poster. Mode selection key: automatic, manual or disarmed. Display with indications of the remaining time for the discharge. Programmable time before the extinction between 0 and 60 seconds. Can be integrated in the algorithmic system. Optional relays to repeat the states of the panel unit. Measures: 320 x 272 x 125 mm. Can contain 2 12V/7Ah batteries.

Devoloped and made by AGUILERA™ Electrónica through UNE EN12 094-1 standards. 2 monitored detection zones. Prorammable operating mode: Double detection, crossed detection, mixed. Monitored detection zone for launching of extinction push button. Monitored input for stop of extinction push button. Launching and stop push buttons included in the motherboard. 2 independent monitored inputs for monitoring the pressure switch or for weighing and flow control. Monitored eVACuation output and output for the fire extinguishing poster. Mode selection key: automatic, manual or disarmed. Display with indications of the remaining time for the discharge. Programmable time before the extinction between 0 and 60 seconds. Can be integrated in the algorithmic system. Optional relays to repeat the states of the panel unit. Measures: 320 x 272 x 125 mm. Can contain 2 12V/7Ah batteries. Contains a microprecessed which informs the algorithmic panel unit of its state permanently.

Designed and made By AGUILERA™ Electrónica through UNE EN12 094-1 standards. 2 monitored detection zones. Operating mode, programable as: Double detection, Crossed detection, mixed. Monitored detection zone for push button to trigger fire extinction. Monitored input for extintion pause button. Fire extinction and pause buttons incorporated in the panel. 2 independent monitored inputs for monitoring the pressure switch or for weighing and flow control. Monitored eVACuation oputput and output for the fire extinguishing poster. Mode selection key: automatic, manual or disarmed. Display with indications of the remaining time for the discharge. Programmable time before the extinction between 0 and 60 seconds. Can be integrated in the algorithmic system. Optional relays to repeat the states of the panel unit. Measures: 320 x 272 x 125 mm. Can contain 2 12V/7Ah batteries. Contains a microprocessed card which informs the algorithmic panel unit of its state permanently.

Interface board to integrate AE/C5-8-16 and AE/C5-8P panels in AGE44 remote control program. Integration realized through TCP/IP. This board its connected into the controlled panel.

Module of 8 remote relay for AE/C5-8-16 panel. Provided with NA or NC voltage free contact, individually selectable through a jumper. Realys are individually activated in case of zone alarm. The module requires 24VDC extern power supply. 4 or 6 Wires connection (If its power supplied from the panel). Maximum panel distance 1000m, maximum number of modules:2.

To expand the panel to 12 zones: a AE/C5-8-16 panel and a AE/C5-MZ4 4 zones card.

To expand the panel to 16 zones: a AE/C5-8-16 panel and two AE/C5-MZ4 4 zones cards.

Microprocessed modular panel made according EN 54-2 and EN 54-4. Modular capacity between 8, 12 and 16 conventional detection zones with active end of line. 2 EVACuation monitored output. Fire and fauilure relay. Test zones mode. Control keys and LEDs for status indication. Capacity for 12V/18Ah battery. Dimensions: 462 X 345 X 120.

Microprocessed metal panels, according to EN54 part 2 and 4. 4 conventional detection loops with active end of line. Access level control through keys. 2 EVACuation monitored output. Fire relay (General alarm) and general breakdown relay. 24VDC auxiliary output. keypad with 6 keys for management. "Zones test" mode. Individual connection/disconnection of detection zones and eVACuation zones. 10 Independent LEDs for alarm indications. Requires a unique 12V/7Ah battery. Continued monitoring of all the system. Dimensions AE/C5-2M: 320 x 220 x 80.

Similar feature than AE/C5-4P panel but with 8 conventional detection zones. Includes selection of push buttons zone or detectors zone, display output and connection to the module by AE/C5-R8 relay. Dimensions: 340X290X100. Allows the control by remote through AE/C5-IDC module and AGE44 telemonitoring software.

Microprocessed metal panels, according to EN54 part 2 and 4. 2 conventional detection loops with active end of line. Access level control through keys. 2 EVACuation monitored output. Fire relay (General alarm) and general breakdown relay. 24VDC auxiliary output. keypad with 6 keys for management. "Zones test" mode. Individual connection/disconnection of detection zones and eVACuation zones. 10 Independent LEDs for alarm indications. Requires a unique 12V/7Ah battery. Continued monitoring of all the system. Dimensions AE/C5-2M: 200 x 290 x 80

Microprocessed panels of attractive design, made in ABS, according to EN 54 part 2 and 4. 4 Conventional detection loop with active end of line. Access level control through keys. 2 EVACuation monitored outputs. Fire relay (General alarm) and general breakdown relay. 24VDC auxiliary output. keypad with 6 keys for management. "Zones test" mode. Individual connection/disconnection of detection zones and eVACuation zones. 10 Independent LEDs for alarm indications. Requires a unique 12V/7Ah battery. Continued monitoring of all the system. Dimensions: 340 x 290 x 100.