Microprocessed unit that manages communications and control for 2 voltage-free inputs. It allows you to customize each entry with the location of the equipment you control and its status change (activated extractor, closed door in the kitchen, ...). Each input can be selected by open contact (SELECTOR IN NO POSITION) or contact closed (SELECTOR IN NC POSITION). Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27 VDC. Consumption at rest: 3.3 mA. Consumption in alarm: 13 mA. (2 inputs activated). Inputs: Voltage free contacts. Selectable by open or closed contact. Temperature range: 0º to 60º C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Activation of each input: fixed yellow. Communications: flashing red. Clamping: 4 Ø3.5 mm holes.

Microprocessed unit that manages communications and control for 8 voltage-free inputs. It allows to customize each entry with the location of the equipment it controls and its status change (valve opened in garage, ...). Each input can be selected by open contact (SELECTOR IN NO POSITION) or contact closed (SELECTOR IN NC POSITION). Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27 VDC. Consumption at rest: 3.5 mA. Inputs: Voltage free contacts. Selectable by open or closed contact. Temperature range: 0º to 60º C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Activation of each input: fixed yellow. Communications: flashing red. Clamping: 4 holes Ø3.5 mm.

Microprocessed unit that manages communications and control for 2 relays (2 different maneuvers). Each output can be customized in the control panel with the name of the place and the maneuver that it executes, and programmed to act with alarms or events of different equipment of the installation. Both outputs are: voltage free (contacts normally open NO, normally closed NC) and with voltage (24 V). Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27 VDC. Consumption at rest: 6 mA Consumption at maximum alarm: 54 mA Outputs: Voltage-free contacts. (NA, COMM, NC) 24 V. Maximum resistive load = 2 A / 30 VDC - 0.6 A / 125 VAC. Maximum switching voltage = 125 VDC - 125 VDC. Maximum switching power = 60 W - 62.5 VA. Temperature range: 0 ° to 60 ° C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Activation of each output: fixed red. Communications: flashing red. Fastening: 4 holes 03.5 mm.

Microprocessed module equipped with a relay output, with line supervision. The output can be customized in the control panel with the name of the place and the maneuver that it executes, and programmed to act with alarms or events of different equipment of the installation. The module monitors faults by open line or by short circuit in the output loop. The output is with voltage: 24 VDC in alarm. Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27V. Consumption at rest: 7 mA. Consumption in alarm: 40 mA. Output: 24 V / 1 A max. Temperature range: 0º to 60º C. Cable cross section: 2 x 1.5 mm² + 1 x 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Output activation: fixed red. Supervised loop fault: fixed yellow. Communications: flashing red. Fastening: 4 holes 03.5 mm.

Remote control of AGE46 installations is an application that allows to control remotely fire protection installations based in control desktops Europa II and Europa III. The connection between the application and remote installations is made by using TCP/IP communications, allowing access to any facility with these kind of communications, independently of its location. In the computers hosting control desktop monitorizing the VNC server must be running AGE46SRV, providing remote access to these devices.

System that allows the control and remote management of fire detection installations. Telecontrol system of AE/SA-TC installations gaves important benefits in new installations, as well as the maintenance of service device. The system allows distance controlling of any installation, based in analogue or algorithmic SA series panels. Composed by AGE44 control software that allows to control the panel connected and makeing any action over the system. It is specially recommended for installations that requires a scheduled remote control from a different location. For exemple, night watchman.

Surface alarm indicator with wide viewing angle. Power supply: 12/24Vcc. Maximum consumption; 20mA. Dimensions:65 x 65 x 35 mm.

Design to indicate the alarm status in visble place of one or more detectors installated in hidden places. Its standard location is on interior doors. Use a built-in box with standard mechanism, 2W lamp, red optic indicator and white ABS trim. Dimensions: 85 x 85 mm. Consumption: 95mA to 24V.

Wall mounting, made in white ABS provided with two high luminosity LEDs. Visible from both sides of corridors. Dimensions: 70 x 50 x 25 mm. Consumption: 35mA to 24V.

Flash certificated EN54-23 for roof mounting. Type C-3-7.5. Maximum installation height 3m, Lenght coverage 7,5m LED technology that ensure luminous intensity 0.4lux/m2 in all the area. Flash frequency selectionable between 1Hz and 0.5Hz. Maximum consumption 25mA. IP65 with highbase.

Flash certificated EN54-23 for roof mounting. Type C-3-7.5. Maximum installation height 3m, Lenght coverage 7,5m LED technology that ensure luminous intensity 0.4lux/m2 in all the area. Flash frequency selectionable between 1Hz and 0.5Hz. Maximum consumption 25mA. IP33 with low base.

Flash certificated EN54-23 for wall mounting. Type W-2.4-7.5. Maximum installation height 2,4m. Length coverage 7.5m. LED technology that ensure luminous intensity 0.4lux/m2 in all the area. Flash frequency selectionable between 1Hz and 0.5Hz. Maximum consumption 25mA. IP33 with low base.

Flash certificated EN54-23 for wall mounting. Type W-2.4-7.5. Maximum installation height 2,4m. Length coverage 7.5m. LED technology that ensure luminous intensity 0.4lux/m2 in all the area. Flash frequency selectionable between 1Hz and 0.5Hz. Maximum consumption 25mA. IP65 with high base.

Low consumption flash: 88mA. Luminous intensity 10Cd. Dimensions: Ø 106 mm, height: 91mm. Protection: IP54 (With low base) IP65 (With high base).

Indicated for indoors, IP40. Provided with a adhesive sign: MONOXIDO DE CARBONO. Can select a fix sound, blinking or without sound and fix or blinking illumination. ABS Material. Dimensions:365 x 180 x 50 mm. Consumption 95mA/24Vcc. Sound intensity 108dB/1m.

Indicated for outdoors, IP65. Provided with two adhesives signs: EXTINCION DISPARADA - FUEGO. Can select a fix sound, blinking or without sound and fix or blinking illumination. ABS material. Consumption 95mA/24Vcc. Sound intensity: 108dB/1m. Dimensions: 365 x 180 x 50 mm.

High intensity acoustic sounder, up to 120dB (A). Dispose of 32 selectionable tones. Certified in accordance with EN54-3. Protection: IP21.

Alarm sounder with voice. Provided of 6 recorded messages selectionables through a dipswitch. Maximum consumption: 8mA. Sound power 95dB, Protection: IP21C. Dimensions: Ø 105mm, height: 91mm.

Indicated for indoors, IP40, provided with two adhesives signs: EXTINCION DISPARADA - FUEGO. Can select a fix sound, blinking or without sound and fix or blinking illumination. ABS material. Consumption 95mA/24Vcc. Sound intensity: 108dB/1m. Dimensions: 365 x 180 x 50 mm.

Outdoor sounder with LEDs luminous indications. Protection: IP54. Dimensions: 210 x 230 x 60 mm. Weight: 1.10kg. Power supply: 12-30VDC. Acoustic power: 95dB at 1meter, Frequency: 3.1-3.8Khz. Temperature range: -40ºC to 85ºC.

Multi-tone sounder with focus, certified EN54-3 and EN54-23 for wall mounting. Type W-2.4-7.5. Maximum installation height 2.4m, Lenght coverage 7.5m. LED technology that ensure a light intensity at 0.4lux/m2 in all areas. Sound power 102dB (A). Maximum consumption 37mA. IP65 Protection.

Low consumption multi-tone sounder without base. Certified in accordance with EN54-3. Consumption between 6 and 33mA, in function of the tone. Dimensions: Ø 93 mm, Height: 63mm. Sound power: 102dB (Tone 3). Protection: IP54 (With low base) IP65 (With high base).

Sounder with multi-tone focus without base. Certified in accordance with EN54-3. Dimensions: Ø 93 mm. Height: 80mm. Sound power; 100dB (Tone 3). Light intensisty: > 0,5Cd. Consumption: 25mA. Protection: IP54 (With low base) IP65 (With high base).

Metal alarm bell of 6" for indoors. Certified in accordance with EN54-3. Provided of micromotor to activate the ringing mechanism, red painted. Sound power: 95dB. Power supply: 24VDC. Consumption: 25mA. Weight: 0,45kg. Protection: IP21.