English
Español
  • Search
    • +34 902930427

    0.00 €

    19 Rack Form Factor

    Products 47
    RACK 8x2A Distribution Fuse Module [RLB8]
    RACK 8x2A Distribution Fuse Module
    Ref.: RLB8
    RACK mounted distribution fuse module. W=19”, H=2U, Power supply output: max. 8 x 2A / UAUX=UIN, Fuse type: glass fuse 8x2A. Power supply: 10÷56VDC, Technical output of the relay type: ALARM – collective failure.
    V.A.T. included
    Consult
    MEANWELL® 19" DHP-1U Chassis (Terminal Block) [DHP-12K1UT-A-48]
    MEANWELL® 19" DHP-1U Chassis (Terminal Block)
    Ref.: DHP-12K1UT-A-48
    DHP-1U rack power system and DHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 3200W, DRP-3200 is the front end rectifier (or, power supply) and DBR-3200 is the charger module. With the active current sharing function, up to 12800W is able to be provided by 1 stack of the 19 rack mountable shelf DHP-1U, with either rectifier or charger, and 25600W by 2 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting four 3200W modules up to 12800W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Dimensions (Length x Width x Height) [mm]: 400 x 482.6 x 44. Output voltage 48 VDC to 268 Amp maximum. Maximum power ratio of 12,864 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RKP-1U Chassis (Terminal Block) [RKP-6K1UT-24]
    MEANWELL® 19" RKP-1U Chassis (Terminal Block)
    Ref.: RKP-6K1UT-24
    RKP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 2000W, RCP-2000 is the front end rectifier (or, power supply). With the active current sharing function, up to 6000W is able to be provided by 1 stack of the 19" rack mountable shelf RKP-1U and 18000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, communication protocol PMBus, remote ON-OFF, auxiliary power, external control/monitor via the control model RCP-CMU-1, etc... Output voltage programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input with terminal block. Output voltage 24 VDC to maximum of 240 Amp. Maximum power ratio of 5,760 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RKP-1U Chassis (Terminal Block) [RKP-6K1UT-12]
    MEANWELL® 19" RKP-1U Chassis (Terminal Block)
    Ref.: RKP-6K1UT-12
    RKP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 2000W, RCP-2000 is the front end rectifier (or, power supply). With the active current sharing function, up to 6000W is able to be provided by 1 stack of the 19" rack mountable shelf RKP-1U and 18000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, communication protocol PMBus, remote ON-OFF, auxiliary power, external control/monitor via the control model RCP-CMU-1, etc... Output voltage programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input with terminal block. Output voltage 12 VDC to maximum of 300 Amp. Maximum power ratio of 3,600 W.
    V.A.T. included
    Consult
    MEANWELL® 19" DHP-1U Chassis (Terminal Block) [DHP-12K1UT-A-24]
    MEANWELL® 19" DHP-1U Chassis (Terminal Block)
    Ref.: DHP-12K1UT-A-24
    DHP-1U rack power system and DHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 3200W, DRP-3200 is the front end rectifier (or, power supply) and DBR-3200 is the charger module. With the active current sharing function, up to 12800W is able to be provided by 1 stack of the 19 rack mountable shelf DHP-1U, with either rectifier or charger, and 25600W by 2 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting four 3200W modules up to 12800W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Dimensions (Length x Width x Height) [mm]: 400 x 482.6 x 44. Output voltage 24 VDC to maximum 532 Amp. Maximum power ratio of 12,768 W.
    V.A.T. included
    Consult
    MEANWELL® RKP-1UI-CMU1 Monitoring for 19" RKP-1U Chassis [RKP-1U-CMU1]
    MEANWELL® RKP-1UI-CMU1 Monitoring for 19" RKP-1U Chassis
    Ref.: RKP-1U-CMU1
    Monitoring and control system for the RCP-2000 series. The RKP-1UI-CMU1 chassis together with the RKP-CMU1 monitoring module can be connected directly to a PC with Windows operating system to control and monitor all the parameters of the source for RCP-2000 rack up to 32uds. Rack format 19 "in 1U Input range 12-15VDC Output current 1A / 12VDC or 0.8A / 15VDC Chassis supply container for RCP-2000 rack and monitoring module RKP-CMU1 for output voltage control, current and internal temperature LED indicators for power on (green) and alarm (red) USB, RS-232 and Ethernet communication interface Input connection with connector clamp Operating temperature: -25 to + 70ºC ambient temperature Consult the technical data sheet to see the drift curves Dimensions (Length x Width x Height): 147.5 x 127 x 41 mm.
    V.A.T. included
    Consult
    MEANWELL® 19" RKP-1U Chassis (Terminal Block) [RKP-6K1UT-48]
    MEANWELL® 19" RKP-1U Chassis (Terminal Block)
    Ref.: RKP-6K1UT-48
    RKP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 2000W, RCP-2000 is the front end rectifier (or, power supply). With the active current sharing function, up to 6000W is able to be provided by 1 stack of the 19" rack mountable shelf RKP-1U and 18000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, communication protocol PMBus, remote ON-OFF, auxiliary power, external control/monitor via the control model RCP-CMU-1, etc... Output voltage programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input with terminal block. Output voltage 48 VDC to maximum of 126 Amp. Maximum power ratio of 6,048 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RHP-1U Chassis (Terminal Block) [RHP-8K1UT-A-48]
    MEANWELL® 19" RHP-1U Chassis (Terminal Block)
    Ref.: RHP-8K1UT-A-48
    RHP-1U rack power system and RHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 1600W, RCP-1600 is the front end rectifier (or, power supply) and RCB-1600 is the charger module. With the active current sharing function, up to 8000W is able to be provided by 1 stack of the 19" rack mountable shelf RHP-1U, with either rectifier or charger, and 24000W by 3 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting five 1600W modules up to 8000W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Entry through connections terminal. Output voltage 48 VDC to maximum 167.5 Amp. Maximum power ratio of 8.040 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RHP-1U Chassis (Terminal Block) [RHP-8K1UT-A-24]
    MEANWELL® 19" RHP-1U Chassis (Terminal Block)
    Ref.: RHP-8K1UT-A-24
    RHP-1U rack power system and RHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 1600W, RCP-1600 is the front end rectifier (or, power supply) and RCB-1600 is the charger module. With the active current sharing function, up to 8000W is able to be provided by 1 stack of the 19" rack mountable shelf RHP-1U, with either rectifier or charger, and 24000W by 3 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting five 1600W modules up to 8000W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Entry through connections terminal. Output voltage 24 VDC to maximum of 335 Amp. Maximum power ratio of 8.040 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RKP-1U Chassis (AC Inlet: IEC320-C14) [RKP-6K1UI-48]
    MEANWELL® 19" RKP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RKP-6K1UI-48
    RKP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 2000W, RCP-2000 is the front end rectifier (or, power supply). With the active current sharing function, up to 6000W is able to be provided by 1 stack of the 19" rack mountable shelf RKP-1U and 18000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, communication protocol PMBus, remote ON-OFF, auxiliary power, external control/monitor via the control model RCP-CMU-1, etc... Output voltage programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input with IEC320-C14. Output voltage 48 VDC to maximum of 126 Amp. Maximum power ratio of 6,048 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RKP-1U Chassis (AC Inlet: IEC320-C14) [RKP-6K1UI-24]
    MEANWELL® 19" RKP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RKP-6K1UI-24
    RKP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 2000W, RCP-2000 is the front end rectifier (or, power supply). With the active current sharing function, up to 6000W is able to be provided by 1 stack of the 19" rack mountable shelf RKP-1U and 18000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, communication protocol PMBus, remote ON-OFF, auxiliary power, external control/monitor via the control model RCP-CMU-1, etc... Output voltage programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input with IEC320-C14. Output voltage 24 VDC to maximum of 240 Amp. Maximum power ratio of 5,760 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RHP-1U Chassis (AC Inlet: IEC320-C14) [RHP-8K1UI-A-48]
    MEANWELL® 19" RHP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RHP-8K1UI-A-48
    RHP-1U rack power system and RHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 1600W, RCP-1600 is the front end rectifier (or, power supply) and RCB-1600 is the charger module. With the active current sharing function, up to 8000W is able to be provided by 1 stack of the 19" rack mountable shelf RHP-1U, with either rectifier or charger, and 24000W by 3 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting five 1600W modules up to 8000W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input IEC320-C14. Output voltage 48 VDC to maximum 167.5 Amp. Maximum power ratio of 8.040 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RKP-1U Chassis (AC Inlet: IEC320-C14) [RKP-6K1UI-12]
    MEANWELL® 19" RKP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RKP-6K1UI-12
    RKP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 2000W, RCP-2000 is the front end rectifier (or, power supply). With the active current sharing function, up to 6000W is able to be provided by 1 stack of the 19" rack mountable shelf RKP-1U and 18000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, communication protocol PMBus, remote ON-OFF, auxiliary power, external control/monitor via the control model RCP-CMU-1, etc... Output voltage programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input with IEC320-C14. Output voltage 12 VDC to maximum of 300 Amp. Maximum power ratio of 3,600 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RHP-1U Chassis (AC Inlet: IEC320-C14) [RHP-8K1UI-A-12]
    MEANWELL® 19" RHP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RHP-8K1UI-A-12
    RHP-1U rack power system and RHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 1600W, RCP-1600 is the front end rectifier (or, power supply) and RCB-1600 is the charger module. With the active current sharing function, up to 8000W is able to be provided by 1 stack of the 19" rack mountable shelf RHP-1U, with either rectifier or charger, and 24000W by 3 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting five 1600W modules up to 8000W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input IEC320-C14. Output voltage 12 VDC to maximum of 625 Amp. Maximum power ratio of 7,500 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RCP-1U Chassis (Terminal Block) [RCP-3K1UT-48]
    MEANWELL® 19" RCP-1U Chassis (Terminal Block)
    Ref.: RCP-3K1UT-48
    RCP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 1000W, RCP-1000 is the front end rectifier (or, power supply). With the active current sharing function, up to 3000W is able to be provided by 1 stack of the 19" rack mountable shelf RCP-1U and 8000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, remote ON-OFF, auxiliary power, etc... Output voltage programmable. Support hot swap (hot plug). Allows PSUs / rectifiers RCP-1000-12. Output voltage: 48 VDC to maximum 63 Amp. Maximum power ratio of 3024 W. AC voltage input via terminal block.
    V.A.T. included
    Consult
    MEANWELL® 19" RHP-1U Chassis (Terminal Block) [RHP-8K1UT-A-12]
    MEANWELL® 19" RHP-1U Chassis (Terminal Block)
    Ref.: RHP-8K1UT-A-12
    RHP-1U rack power system and RHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 1600W, RCP-1600 is the front end rectifier (or, power supply) and RCB-1600 is the charger module. With the active current sharing function, up to 8000W is able to be provided by 1 stack of the 19" rack mountable shelf RHP-1U, with either rectifier or charger, and 24000W by 3 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting five 1600W modules up to 8000W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Entry through connections terminal. Output voltage 12 VDC to maximum of 625 Amp. Maximum power ratio of 7,500 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RCP-1U Chassis (Terminal Block) [RCP-3K1UT-12]
    MEANWELL® 19" RCP-1U Chassis (Terminal Block)
    Ref.: RCP-3K1UT-12
    RCP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 1000W, RCP-1000 is the front end rectifier (or, power supply). With the active current sharing function, up to 3000W is able to be provided by 1 stack of the 19" rack mountable shelf RCP-1U and 8000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, remote ON-OFF, auxiliary power, etc... Output voltage programmable. Support hot swap (hot plug). Allows PSUs / rectifiers RCP-1000-12. Output voltage: 12 VDC to maximum 180 Amp. Maximum power ratio of 2160 W. AC voltage input via terminal block.
    V.A.T. included
    Consult
    MEANWELL® 19" RHP-1U Chassis (AC Inlet: IEC320-C14) [RHP-8K1UI-A-24]
    MEANWELL® 19" RHP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RHP-8K1UI-A-24
    RHP-1U rack power system and RHB-1U rack charger system are the complete solution for the power distribution utilizing the rack configuration with the 1U low profile. Starting with a single unit of 1600W, RCP-1600 is the front end rectifier (or, power supply) and RCB-1600 is the charger module. With the active current sharing function, up to 8000W is able to be provided by 1 stack of the 19" rack mountable shelf RHP-1U, with either rectifier or charger, and 24000W by 3 stacks with rectifier. Universal AC input / Full range. 1U profile 19" rack shelf, fitting five 1600W modules up to 8000W with active current sharing. Output voltage and current programmable. Support hot swap (hot plug). Built-in PMBus protocol. Universal input range 90-264VAC. 47-63Hz. Input IEC320-C14. Output voltage 24 VDC to maximum of 335 Amp. Maximum power ratio of 8.040 W.
    V.A.T. included
    Consult
    MEANWELL® 19" RCP-1U Chassis (AC Inlet: IEC320-C14) [RCP-3K1UI-12]
    MEANWELL® 19" RCP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RCP-3K1UI-12
    RCP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 1000W, RCP-1000 is the front end rectifier (or, power supply). With the active current sharing function, up to 3000W is able to be provided by 1 stack of the 19" rack mountable shelf RCP-1U and 8000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, remote ON-OFF, auxiliary power, etc... Allows PSUs / rectifiers RCP-1000-12. Output voltage: 12 VDC to maximum 180 Amp. Maximum power ratio of 2160 W. AC voltage input via IEC 320-C14 connector.
    V.A.T. included
    Consult
    MEANWELL® 19" RCP-1U Chassis (Terminal Block) [RCP-3K1UT-24]
    MEANWELL® 19" RCP-1U Chassis (Terminal Block)
    Ref.: RCP-3K1UT-24
    RCP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 1000W, RCP-1000 is the front end rectifier (or, power supply). With the active current sharing function, up to 3000W is able to be provided by 1 stack of the 19" rack mountable shelf RCP-1U and 8000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, remote ON-OFF, auxiliary power, etc... Output voltage programmable. Support hot swap (hot plug). Allows PSUs / rectifiers RCP-1000-12. Output voltage: 24 VDC to maximum 120 Amp. Maximum power ratio of 2880 W. AC voltage input via terminal block.
    V.A.T. included
    Consult
    MEANWELL® RCP-MU Monitoring for 19" RKP-1U Chassis [RKP-CMU1]
    MEANWELL® RCP-MU Monitoring for 19" RKP-1U Chassis
    Ref.: RKP-CMU1
    RKP-CMU1 is a fully digitalized control / monitor unit for the RKP-1U power system. Equipped with USB, RS-232, and ethernet interface, i t can be connected locally to PC to execute the control and monitoring tasks. With built-in 4 configurable relay contacts, users can flexibility monitor specific events or alarms and react suitable action accordingly. 1U low profile/19-inch rack mountable. Front panel LCD and buttons for on-site service without PC. USB-, RS-232 or Ethernet interface for PC connection locally or remote monitoring and control via GSM modem. Alarm/event log with time and date. Windows-based PC communication software. Easy wire connections on rear side. 4 user programmable relay outputs for traditional remote monitoring or warning.
    V.A.T. included
    Consult
    MEANWELL® RCP-MU Monitoring for 19" RCP-1U Chassis [RCP-MU]
    MEANWELL® RCP-MU Monitoring for 19" RCP-1U Chassis
    Ref.: RCP-MU
    RCP-MU is the monitoring and control unit used for the RCP-1000 series rack power. lt can decode the l2C signal sent by RCP series and display through digital meters or relay contact signals. RCP-MU can also turn ON/OFF or trim the output voltage of RCP-1000 remotely that make the basic control more easily. 1U low profile. 19-inch rack mounting. Control and monitor up to 3 RCP-1000 units. Suitable for all kinds of RCP output (12V,24V,48V). Digital meters for output voltage, output current, and internal temperature on front panel. Potential meter for adjusting output voltage of RCP-1000 unit on front panel. Relay contacts and LED indicators for AC fail, DC fail, and over temperature warning. Removable fixing accessory.
    V.A.T. included
    Consult
    MEANWELL® 19" RCP-1U Chassis (AC Inlet: IEC320-C14) [RCP-3K1UI-48]
    MEANWELL® 19" RCP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RCP-3K1UI-48
    RCP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 1000W, RCP-1000 is the front end rectifier (or, power supply). With the active current sharing function, up to 3000W is able to be provided by 1 stack of the 19" rack mountable shelf RCP-1U and 8000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, remote ON-OFF, auxiliary power, etc... Allows PSUs / rectifiers RCP-1000-12. Output voltage: 48 VDC to maximum 63 Amp. Maximum power ratio of 3024 W. AC voltage input via IEC 320-C14 connector.
    V.A.T. included
    Consult
    MEANWELL® 19" RCP-1U Chassis (AC Inlet: IEC320-C14) [RCP-3K1UI-24]
    MEANWELL® 19" RCP-1U Chassis (AC Inlet: IEC320-C14)
    Ref.: RCP-3K1UI-24
    RCP-1U rack system is a power distribution solution utilizing the rack configuration with 1U low profile. Starting with a single unit of 1000W, RCP-1000 is the front end rectifier (or, power supply). With the active current sharing function, up to 3000W is able to be provided by 1 stack of the 19" rack mountable shelf RCP-1U and 8000W by 3 stacks. The design flexibility for system applications is ideally fulfilled by various built-in features, such as output programming, remote ON-OFF, auxiliary power, etc... Allows PSUs / rectifiers RCP-1000-12. Output voltage: 24 VDC to maximum 120 Amp. Maximum power ratio of 2880 W. AC voltage input via IEC 320-C14 connector.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved