English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Specials

    Products 95
    STX ELMDENE™ Smart Power Supply (24VDC-10Amp) [STX2410-E]
    STX ELMDENE™ Smart Power Supply (24VDC-10Amp)
    Ref.: STX2410-E
    Supervised power supply. Mounted in a box and with battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Working temperature: -10 ° C to 40 ° C. Requires 2 reference batteries BS130N or BS131N (not included). Dimensions: 400 x 420 x 80 mm. Amperage 10.0A + 0.7A for battery charging.
    V.A.T. included
    609.24 €
    STX ELMDENE™ Smart Power Supply (24VDC-5Amp) [STX2405-E]
    STX ELMDENE™ Smart Power Supply (24VDC-5Amp)
    Ref.: STX2405-E
    Monitored power supply unit. Mounted in a box and with a battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Operation temperature: -10ºC to 40ºC, Requires 2 batteries BS131N reference (Not included). Dimensions: 400 x 420x 80mm. Amperage 5,0A+0,85A for battery charging.
    V.A.T. included
    467.75 €
    STX ELMDENE™ Smart Power Supply (24VDC-2Amp) [STX2402-E]
    STX ELMDENE™ Smart Power Supply (24VDC-2Amp)
    Ref.: STX2402-E
    Monitored power supply unit. Mounted in a box and with a battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Operation temperature: -10ºC to 40ºC, Requires 2 batteries BS131N reference (Not included). Dimensions: 400 x 420x 80mm. Amperage 2,0A+0,7A for battery charging.
    V.A.T. included
    387.05 €
    STX ELMDENE™ Smart Power Supply (24VDC-1Amp) [STX2401-C]
    STX ELMDENE™ Smart Power Supply (24VDC-1Amp)
    Ref.: STX2401-C
    Monitored power supply unit. Mounted in a box and with a battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Operation temperature: -10ºC to 40ºC, Requires 2 batteries BS127N reference (Not included). Dimensions: 275 x 330 x 80mm. Amperage 1,2A+0,3A for battery charging.
    V.A.T. included
    322.02 €
    Cable for extension batteries UTC™ Aritech™ [PM700BC]
    Cable for extension batteries UTC™ Aritech™
    Ref.: PM700BC
    Cable for box of PM700BAT extern batteries. Lenght of the cable 3m.
    V.A.T. included
    47.03 €
    UTC™ Aritech™ Extern Battery Box [PM700BAT]
    UTC™ Aritech™ Extern Battery Box
    Ref.: PM700BAT
    Extern box for batteries and to used with PM705C source of power supply. Admit two batteries up to 38Ah. Dimensions: 420 x 420 x 280mm.
    V.A.T. included
    268.78 €
    DIN rail support / EN54M 1 [EN54M-DIN1]
    DIN rail support / EN54M 1
    Ref.: EN54M-DIN1
    Destination: For DIN rail mounting of EN54M series power supplies. Dimensions: 268 x 24 x 120 mm. Notes: set of screws, 4 pcs M3x4.
    V.A.T. included
    33.03 €
    UTC™ Aritech™ External Battery Box with STX2410-E Source [BATT-BOX-65]
    UTC™ Aritech™ External Battery Box with STX2410-E Source
    Ref.: BATT-BOX-65
    External battery box for use with the STX2410-E power supply, incorporates wiring. It admits batteries up to 65A. Dimensions: 465 x 534 x 270 mm.Certified according to EN54-4.
    V.A.T. included
    408.94 €
    AGUILERA™ 13.8VDC PSU for Lithium Batteries - DIN Rail [AE/GI-AL102]
    AGUILERA™ 13.8VDC PSU for Lithium Batteries - DIN Rail
    Ref.: AE/GI-AL102
    Power supply for charging lithium emergency batteries.
    V.A.T. included
    360.48 €
    AGUILERA™ 13.8VDC Buffered PSU -DIN Rail [AE/GI-AL101]
    AGUILERA™ 13.8VDC Buffered PSU -DIN Rail
    Ref.: AE/GI-AL101
    13.8Vdc power supply for charging the emergency battery.
    V.A.T. included
    360.48 €
    AGUILERA™ Switching Power Supply (24VDC @ 2Amp) with Integration Card [AE/94-FA2]
    AGUILERA™ Switching Power Supply (24VDC @ 2Amp) with Integration Card
    Ref.: AE/94-FA2
    Switched short-circuit protected protected power supply at 24VDC/2A made according to EN54-4 standard. Input 230/115VAC; 50/60Hz. LED indications for general status, battery charging and output fuses according to EN54-4 standard. With 2 independent outputs protected against short-circuits. Equipped with a microprocessor card for permanent state monitorization. Capacity for 2 (two) 12V/17Ah batteries. Dimensions: 320 x 272 x 125 mm.
    V.A.T. included
    Consult
    AGUILERA™ 24VDC PSU - DIN Rail [AE/GI-AL100]
    AGUILERA™ 24VDC PSU - DIN Rail
    Ref.: AE/GI-AL100
    24Vdc power supply for the CE100 system. 230 Vac input.
    V.A.T. included
    313.05 €
    AGUILERA™ High Capacity Power Supply (24VDC @ 12Amp) [AE/FL-12A]
    AGUILERA™ High Capacity Power Supply (24VDC @ 12Amp)
    Ref.: AE/FL-12A
    EN54-4 Certified with a maximum output current at 12A. Made in accordance with DBT, CEM, DEEE 2002/96 CE and RoHS 2002/95 CE standards and European directives. Isolated protected outputs. Real time status monitoring for the complete system: Networt interface, power supply charger, batteries and protection. Temperature compensation. Batteries capacity up to 48Ah. Dimensions: 408 x 408 x 224 mm.
    V.A.T. included
    Consult
    AGUILERA™ High Capacity Power Supply (24VDC @ 8Amp) [AE/FL-8A]
    AGUILERA™ High Capacity Power Supply (24VDC @ 8Amp)
    Ref.: AE/FL-8A
    EN54-4 Certified with a maximum output current at 8A. Made in accordance with DBT, CEM, DEEE 2002/96 CE and RoHS 2002/95 CE standards and European directives. Isolated protected outputs. Real time status monitoring for the complete system: Networt interface, power supply charger, batteries and protection. Temperature compensation. Batteries capacity up to 48Ah. Dimensions: 408 x 408 x 224 mm.
    V.A.T. included
    Consult
    AGUILERA™ Switching Power Supply (24VDC @ 2Amp) [AE/FL-2A]
    AGUILERA™ Switching Power Supply (24VDC @ 2Amp)
    Ref.: AE/FL-2A
    Switched short-circuit protected protected power supply at 24VDC/2A made according to EN54-4 standard. Input 230/115VAC; 50/60Hz. LED indications for general status, battery charging and output fuses according to EN54-4 standard. With 2 independent outputs protected against short-circuits. Equipped with a microprocessor card for permanent state monitorization. Capacity for 2 (two) 12V/17Ah batteries. Dimensions: 272 x 320 x 125 mm.
    V.A.T. included
    Consult
    AGUILERA™ Switching Power Supply (24VDC @ 5Amp) [AE/FL-5A]
    AGUILERA™ Switching Power Supply (24VDC @ 5Amp)
    Ref.: AE/FL-5A
    Switched short-circuit protected protected power supply at 24VDC/5A made according to EN54-4 standard. Input 230/115VAC; 50/60Hz. LED indications for general status, battery charging and output fuses according to EN54-4 standard. With 2 independent outputs protected against short-circuits. Equipped with a microprocessor card for permanent state monitorization. Capacity for 2 (two) 12V/17Ah batteries. Dimensions: 440 x 390 x 100 mm.
    V.A.T. included
    Consult
    AGUILERA™ Switching Power Supply (24VDC @ 2Amp) with Integration Card [AE/SA-FA2]
    AGUILERA™ Switching Power Supply (24VDC @ 2Amp) with Integration Card
    Ref.: AE/SA-FA2
    Switched short-circuit protected protected power supply at 24VDC/2A made according to EN54-4 standard. Input 230/115VAC; 50/60Hz. LED indications for general status, battery charging and output fuses according to EN54-4 standard. With 2 independent outputs protected against short-circuits. Equipped with a microprocessor card for permanent state monitorization. Capacity for 2 (two) 12V/17Ah batteries. Dimensions: 320 x 272 x 125 mm.
    V.A.T. included
    Consult
    AGUILERA™ Switching Power Supply (24VDC @ 5Amp) with Integration Card [AE/SA-FA]
    AGUILERA™ Switching Power Supply (24VDC @ 5Amp) with Integration Card
    Ref.: AE/SA-FA
    Switched short-circuit protected protected power supply at 24VDC/5A made according to EN54-4 standard. Input 230/115VAC; 50/60Hz. LED indications for general status, battery charging and output fuses according to EN54-4 standard. With 2 independent outputs protected against short-circuits. Equipped with a microprocessor card for permanent state monitorization. Capacity for 2 (two) 12V/17Ah batteries. Dimensions: 390 x 440 x 100 mm.
    V.A.T. included
    Consult
    UTC™ Aritech™ Smart Power Supply (24VDC-2Amp) [PM702C]
    UTC™ Aritech™ Smart Power Supply (24VDC-2Amp)
    Ref.: PM702C
    Monitored power supply unit at 24V. Mounted in a box and with a battery charger up to 17Ah. Requires 2 batteries BS131N reference (Not included). With CPR, EN54-4 and VDS Certificates. Overload protection. Fault relay output. Battery discharge protection. Operating temperature: -10ºC to 40ºC. Dimensions: 400 x 420 x 80mm. Amperage 2A + 0,8A for battery charging.
    V.A.T. included
    Consult
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (4Amp) [2010-1-PS-40]
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (4Amp)
    Ref.: 2010-1-PS-40
    Power supply module in grid box. Dimensions: 160 x 60 x 245 mm. Certifications: EN54-13, EN54-2, CPD, RoHS, WEEE.
    V.A.T. included
    167.57 €
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (2.5Amp) [2010-1-PS-20]
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (2.5Amp)
    Ref.: 2010-1-PS-20
    Power supply module in grid box. Dimensions: 160 x 60 x 245 mm. Certifications: EN54-13, EN54-2, CPD, RoHS, WEEE.
    V.A.T. included
    100.61 €
    KILSEN® Power Supply with Tamper Switch (24VDC-2Amp) [PM862]
    KILSEN® Power Supply with Tamper Switch (24VDC-2Amp)
    Ref.: PM862
    Power supply unit. Output: 24V. Mounted in a box and with a battery charger. Requires 2 batteries BS122N reference (Not included). Operating temperature: -10ºC to 40ºC. Dimensions: 330 x 275 x 80mm. Amperage 2.0A.
    V.A.T. included
    309.51 €
    KILSEN® Power Supply with Tamper Switch (24VDC-1Amp) [PM861]
    KILSEN® Power Supply with Tamper Switch (24VDC-1Amp)
    Ref.: PM861
    Power supply unit. Output: 24V. Mounted in a box and a battery charger. Requires 2 batteries BS122N reference(not included). Operating temperature: -10°C to 40°C. Dimensions: 330 x 275 x 80 mm. Amperage 1.0A.
    V.A.T. included
    232.16 €
    KILSEN® Power Supply with Tamper Switch (24VDC-5Amp) [PM865]
    KILSEN® Power Supply with Tamper Switch (24VDC-5Amp)
    Ref.: PM865
    Power supply unit. Output: 24V. Mounted in a box and with a battery charger. Requires 2 batteries BS122N reference (Not included). Operating temperature: -10ºC to 40ºC. Dimensions: 330 x 275 x 80mm. Amperage 5.0A.
    V.A.T. included
    521.45 €
    SYSAWAY© 2024 All rights reserved